Bedienungsanleitung Sage BES880 - the Barista Touch (Seite 16 von 156) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

711599

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

CLEANING THE STEAM WAND

• The steam wand should always be cleaned

after texturing milk. Wipe the steam wand with

a damp cloth.

• If any of the holes in the tip of the steam wand

become blocked, it may reduce frothing

performance.

• Go to ‘Settings’ > ‘Steam wand cleaning’ and

follow the guide on the screen.

CLEANING THE FILTER BASKETS

AND PORTAFILTER

• The lter baskets and portalter should be rinsed

under hot water immediately after use to remove

all residual coee oils.

• If any of the holes in the lter basket become

blocked, use the pin on the end of the provided

cleaning tool to unblock the hole(s).

• If the hole(s) remain blocked, dissolve a cleaning

tablet in hot water and soak lter basket and

portalter in solution for approx. 20 minutes.

Rinse thoroughly.

CLEANING THE SHOWER SCREEN

• The group head interior and shower screen

should be wiped with a damp cloth to remove

any ground coee particles.

• Periodically purge the machine. Place an empty

lter basket and portalter into the group head.

Touch the 'Brew' button and run a short ow of

water to rinse out any residual coee.

CLEANING THE DRIP

& STORAGE TRAY

• The drip tray should be removed, emptied and

cleaned at regular intervals, particularly when

the drip tray full indicator is showing EMPTY ME!

• Remove the grill from the drip tray.

Lift the coee grind separator and dispose of

any coee grounds. The EMPTY ME! indicator

can also be removed from the drip tray by pulling

upwards to release the side latches. Wash all

parts in warm soapy water with a soft cloth.

Rinse and dry thoroughly.

• The storage tray (located behind the drip tray)

can be removed and cleaned with a soft, damp

cloth. Do not use abrasive cleansers, pads

or cloths which can scratch the surface.

NOTE

All parts should be cleaned by hand using warm

water and a gentle dish washing liquid. Do not

use abrasive cleansers, pads or cloths which can

scratch the surface. Do not clean any of the parts

or accessories in the dishwasher.

CLEANING THE OUTER HOUSING

& CUP WARMING TRAY

The outer housing and cup warming tray can be

cleaned with a soft, damp cloth. Polish with a soft,

dry cloth. Do not use abrasive cleansers, pads

or cloths which can scratch the surface.

STORING YOUR MACHINE

Before storing, press the POWER button to

switch the machine o and remove the plug from

the power outlet. Remove unused beans from the

hopper, clean the grinder (see page 15), empty the

water tank and the drip tray. Ensure the machine

is cool, clean and dry. Insert all accessories into

the storage tray. Store upright. Do not place

anything on top.

WARNING

Do not immerse power cord, power plug

or appliance in water or any other liquid.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sage BES880 - the Barista Touch Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info