Bedienungsanleitung Sage BPR700 - the Fast Slow Pro (Seite 13 von 148) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

617971

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

7. Close the lid and turn the lid knob clockwise

to lock into place. The cooker alert will sound

when the lid has been locked. Check that the

safety locking pin is properly aligned with the

opening in the lid arm and is not restricted

in any way.

8. Ensure the pressure release valve is placed on

the lid, is properly seated in position and facing

the lid knob.

9. Press the START / SELECT dial to commence

cooking. The STOP / CANCEL button backlight

will illuminate red, the LCD screen will

illuminate orange, ‘PREHEATING’ will appear

and the pressure bar on the left will climb to

indicate the cooker is building pressure.

NOTE

It is normal for the cooker to release small bursts

of steam as it stabilises its internal pressure.

10. If the lid has not been locked correctly ‘LOCK

LID’ will appear on the LCD screen. Turn

the lid knob clockwise to lock the lid and

commence cooking.

11. Once the cooker has reached pressure,

the ‘PREHEATING’ will go out, the cooker alert

will sound, the timer will start counting down

and the pressure bar will indicate the current

pressure in the vessel.

12. The time can be adjusted during the pressure

cook cycle by turning the TIME dial. The cycle

can be paused at any time by pressing the

STOP / CANCEL button. To end the cycle

press and hold STOP / CANCEL for 2 seconds.

If there is already pressure in the vessel it will

go immediately to the steam release cycle.

 At the end of the pressure cook cycle, the

cooker alert will sound and steam will be

automatically released through the pressure

release valve. The steam icon will blink, the

timer will start counting up and the pressure

bar will decrease, indicating the current

pressure in the vessel. If NATURAL steam

release is selected, pressure will naturally

subside in the vessel without forcing steam

through the pressure release valve. The steam

release setting can be changed during the

steam release cycle by pressing the STEAM

RELEASE button.

14. At the end of the steam release cycle, the

cooker alert will sound, the LCD will illuminate

blue and the timer will start counting up.

15. Open the lid by turning the lid knob counter

clockwise and carefully lift the lid into the

hinged open position.

16. After 5 minutes of inactivity, standby mode will

be activated. The button backlight will go out

and the LCD will no longer illuminate.

CAUTION

To avoid scalding from escaping steam, never

place your face or hands over the cooker when

removing the lid.

NOTE

If the lid will not unlock this indicates the appliance

is still under pressure. Do not force the lid open

as any remaining pressure can be hazardous.

Press the STEAM RELEASE button until all internal

pressure is released and the lid opens easily.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sage BPR700 - the Fast Slow Pro Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sage BPR700 - the Fast Slow Pro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info