Bedienungsanleitung Sage BPR700 - the Fast Slow Pro (Seite 17 von 148) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

617971

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Care & Cleaning

The cooker bowl, outer body, lid and accessories

should be thoroughly cleaned before every use.



by pressing and holding the STOP / CANCEL



the button backlight is no longer illuminated.

Remove the power plug from the power outlet

and remove the connector end of the power

cord from the cooker base. Allow the cooker

and all accessories to cool completely before

disassembling and cleaning.

CLEANING THE BOWL AND

OUTER BODY

1. The removable cooking bowl can be washed

in the dishwasher. However, to maintain the

ceramic coating, it is recommended to wash

the cooking bowl in warm soapy water using

a mild household detergent. Rinse with clean

water and dry thoroughly.

2. Wipe the moat and outer body with a soft,

damp sponge. A non-abrasive liquid cleanser

or mild spray solution may be used to

avoid build-up of stains. Apply the cleanser

to the sponge, not the cooker surface,

before cleaning.

 Remove condensation drip cup by gently

pulling the bottom away from the body. Wash

in warm soapy water, rinse with clean water,

dry thoroughly and click back into position.

4. Wipe the LCD screen with a soft damp cloth.

Cleaning with dry cloth or abrasive cleaners

may scratch the surface.

5. Let all surfaces dry thoroughly prior to inserting

the power plug into a power outlet and turning

the cooker on.

CLEANING THE LID

1. Remove the pressure release valve from

the lid.

2. Open the lid by turning the lid knob counter



appliance until it is in the hinged open position.

Unscrew and remove the sealing nut from the

centre of the lid and pull the lid away to remove

from the lid arm.

 Gently pull the silicone lid seal out from around

the wire ring on the underside of the lid.

4. Wash the sealing nut and pressure release

valve in warm soapy water. Rinse with clean

water and dry thoroughly.

5. Wash the silicone lid seal and the lid on the

top rack of the dishwasher. Alternatively,

wash in warm soapy water, rinse with

clean water and dry thoroughly.

6. After cleaning the lid, regularly inspect

and ensure;

 Safety locking pin moves up and down

freely. Always remove any oil or food

residue left on this area.

 Pressure release valve and cover are

clean and free of food or liquid. To clean,

twist and pull the pressure release valve



rinse and dry thoroughly. Clip cover back

into its original position.

 Pressure safety valve is clean and free

of food or liquid. To clean, push the valve

from inside so the valve sits open on the

lid and remove any oil or food residue.

Ensure the valve moves in and out

smoothly after cleaning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sage BPR700 - the Fast Slow Pro Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sage BPR700 - the Fast Slow Pro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info