Bedienungsanleitung Sage SBL620 (Seite 8 von 76) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

714757

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Troubleshooting

Care & Cleaning

Jug and lid

In order to keep your Jug clean and avoid food

drying on the blades and jug, follow the below

steps as soon as possible after use

• Rinse most of the ingredients o the jug and lid.

• Fill the jug with 500ml of warm water and press

the AUTO CLEAN button. If thick or sticky

ingredients require extra cleaning power add

a few drops of dish liquid detergent.

• Rinse the jug and lid again and/or wash

separately in warm soapy water with a soft

cloth or bottle brush.

• It is most eective to clean the jug immediately

after use.

Motor base

To clean the motor base, wipe with a soft, damp

cloth then dry thoroughly. Wipe any excess food

particles from the power cord.

Cleaning agents

Do not use abrasive scouring pads or cleaners

on either the motor base or the jug, as they may

scratch the surface. Use only warm soapy water

with a soft cloth.

Dishwasher

The blender jug and lid can be washed in the

dishwasher on a standard wash cycle. The jug can

be placed on the bottom shelf, however the lid and

inner measuring cap should be washed on the top

shelf only. Be aware that washing parts on a regular

base in the dishwasher can shorten the life of them

due to prolonged exposure to harsh detergents,

hot water and pressure.

Stubborn food stains and odours

Strong smelling foods such as garlic, sh and some

vegetables such as carrots may leave an odour

or stain on the blender jug and lid. To remove, soak

blender jug and lid for 5 minutes in warm soapy

water. Then wash with a mild detergent and warm

water, rinse well and dry thoroughly. Store jug with

the lid o.

Storage

Store your blender upright with the blender jug

assembled on the motor base, or beside it.

Do not place anything on top. To allow air to

circulate, keep the lid o.

PROBLEM EASY SOLUTION

Motor doesn’t start or

blade doesn’t rotate

• Check the blender jug and lid are securely in place.

• Check the ON / OFF button and selected function button is illuminated.

• Check that the power plug is properly inserted into the power outlet.

Food is unevenly

chopped

• This can happen when too much food is being blended at one time.

Try a smaller amount, and work in batches if necessary.

• The ingredients may be too large. Try cutting into smaller pieces.

For best results, ingredients should be in pieces no larger than 2cm.

Food is chopped too

ne or is watery

• Try blending for shorter period of time. Use the PULSE function

for better control.

Food sticks to blade

and jug

• The mixture may be too thick. Try adding more liquid and/or using

a slower speed for blending.

Blender overloaded

(all lights ashing)

• This blender has overload protection to prevent damage to the motor.

OVERLOAD PROTECTION will ash on the LCD. Unplug and allow

the blender to cool down for 30 minutes. Once cooled, you will be able

to use the blender as usual again.

• We recommend blending in smaller batches, or cutting ingredients

into smaller batches.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sage SBL620 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info