Bedienungsanleitung Sage SKE825 - the Smart Kettle (Seite 7 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

711643

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

OPERATING YOUR SAGE

PRODUCT

BEFORE FIRST USE

Remove and safely discard any packaging material

or promotional labels attached to your kettle. It is

recommended that before rst use to ll the kettle

to the maximum level, bring to the boil by selecting

the BOIL 100° button, then discard the water.

OPERATION OF YOUR KETTLE

1. Fill with the desired amount of water.

NOTE

Always ll the kettle between the minimum

(500ml) and maximum (1700ml) marks

on the water window.

2. Ensure the lid is closed and locked rmly

into place. Position the kettle securely onto

the power base. Insert the power plug into

a 230/240 power outlet and switch on.

NOTE

If the START / CANCEL button is pressed

(before selecting a temperature button),

the START / CANCEL button surround

will illuminate in red and the 100° button

surround will illuminate and the kettle will

start heating.

3. Select the desired temperature. The

selected button and the START / CANCEL

button surround will illuminate in white.

4. Press the START / CANCEL button. Do

not remove the kettle from the power base

during operation. Ensure the kettle has

switched o after the water has boiled or

the selected temperature has been reached

before removing the kettle from the power

base. If the kettle is removed from the power

base during the KEEP WARM function the

kettle will automatically switch o.

5. When the kettle has heated the water to the

selected temperature, 3 beeps will sound.

6. If the KEEP WARM function has been

selected, the KEEP WARM button surround

will remain illuminated in red, the selected

temperature button surround will remain

illuminated in white, and the kettle will

maintain the desired setting for 20 minutes.

SAFETY BOIL DRY PROTECTION

The kettle is tted with a safety device, which

protects against overheating should the appliance

be operated with insucient water. If this occurs

the kettle will stop heating. Switch O at the power

point and allow kettle to cool before relling.

The safety device will automatically reset when

the kettle has cooled down.

Always switch o at the power outlet and unplug

the appliance from the power outlet before cleaning.

REMOVABLE FILTER

The Smart Kettle

™

features a removable mesh

lter to remove scale deposits for cleaner water.

To clean the scale deposits from the lter,

remove the lter by opening the lid and sliding

the lter up and out of the kettle.

The lter can be cleaned by placing under

running hot water and rubbing with a cleaning

cloth or brush. To replace the lter, simply slide

the lter down into the slot behind the spout

of the kettle and push back into position.

NOTE

The lter could become damaged with

time, so please check regularly and

replace if found damaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sage SKE825 - the Smart Kettle Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info