Bedienungsanleitung Sagem ATA 101S (Seite 16 von 132) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

521757

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

12 Sagem Fax ATA 101S

SAFETY INSTRUCTIONS

Read these safety notes carefully before using this product to make sure

you operate the equipment safely.

Warning: This warning alerts users to areas of the product

where there is the possibility of personal injury.

Your Sagem Communications product and recommended

supplies have been designed and tested to meet strict safety

requirements. These include safety agency approval, and compliance to

established environmental standards. Please read the following

instructions carefully before operating the product and refer to them as

needed to ensure the continued safe operation of your product. The safety

and environment testing and performance of this product have been

verified using Sagem Communications materials only.

Warning: Any unauthorized alteration, which may include the

addition of new functions or connection of external devices, may

impact the product warranty. Please contact your authorized

Service Provider for more information.

Warning Markings: All warning instructions marked on or supplied with

the product should be followed.

Do not remove the type plate from your device; this would voice the

warranty.

Protect the device against direct sunlight, heat, large temperature

fluctuations and moisture. Do not place the device in the vicinity of heaters

or air conditioners. In the event that the device becomes too hot, or if you

see smoke coming from the device, you must immediately pull the power

cable out of the power socket. Have your device examined by trained

professionals at a technical service location. To prevent the spread of fire,

open flames should be kept away from the device.

Electrical Supply

This product shall be operated from the type of electrical supply indicated

on the product’s data plate label. If you are not sure that your electrical

supply meets the requirements, please consult your local power company

for advice.

Warning - Electrical Safety Information

• Only use the supplied power supply (KSAD1200150W1UK A - NETBIT

for UK; KSAD1200150W1EU A - NETBIT for Europe;

KSAD1200150W1US - Ktec for USA/Canada).

Using an unauthorized power supply may damage the device.

Connect it to a mains outlet in compliance with the installation

instructions in this booklet and the indications stated on the

identification label located on the unit (voltage, current and frequency of

the electricity network). As a precaution, in case of danger, the mains

adapters act as a disconnecting mechanism for the 110V or 230V

power supply. They should be placed near the device and should be

easily accessible.

• This equipment is to be used on a branch circuit, that has larger

capacity than rated ampere and voltage of this machine. See data plate

on the rear panel for the rated ampere and voltage of this equipment.

• Do not place this equipment where people might step on or trip over the

power cord.

• Do not plug in the device in moist rooms.

Sagem_Fax_ATA101S.book Page 12 Jeudi, 21. février 2008 5:09 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sagem ATA 101S Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info