521549
163
Zoom out
Zoom in
Vorherige Seite
1/170
Nächste Seite
English
- 22 -
12.2.2. Remote access control
To remotely access your answering machine: Dial your telephone number and wait for the
answering machine to come on.
When your outgoing message is played, press # and enter your remote access code (0000 by
default).
Note!
The code for remote access to the answering machine corresponds in fact to the
PIN Code of your Base. This code is 0000 by default, and it can be modified from
the "ADVANCED SET / CHANGE PIN" menu (refer to the paragraph “Base master PIN code”
page 14).
A beep will indicate access to the answering machine. You can carry out the following
operations:
1: Previous message.
2: Listen to your messages.
3: Next message.
6: Delete the current message.
8: Stop the playback of the message.
9: Switch OFF the answering machine.
12.3.
Selecting the answering machine language
You can choose the language of your answering machine. The messages will be played back in
the language you select.
1. Press
. Select "answ machine " using the or , press .
2. Select "settings" using the or key, press
.
3. Select "language" using the or key, press
.
4. In the list, choose the desired language using the  or key.
12.4.
Memory status
Your answering machine has a capacity of 15 minutes (2 minutes for the OGM and 13
minutes for the messages) or 59 messages.
When your answering machine reaches its maximum recording capacity, you can no longer
receive new messages.
13. Changing the battery
Make sure the telephone is OFF before you replace battery.
1. Remove the battery compartment door.
2. Disconnect the jack attached to the battery pack then remove the battery pack from the
handset.
3. Insert the new battery pack and connect the cord into the jack inside the handset.
4. Put the battery compartment door back on.
5. Place handset in the base to charge. Allow the handset battery to properly charge (for
12 hours) prior to first use or when you install a new battery pack. If you do not properly
charge the phone, battery performance will be compromised.
163

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sagem D16V wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info