Bedienungsanleitung Sagem PHOTOEASY 270 (Seite 13 von 164) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch, Türkisch, Schwedisch)

489673

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

- 1 -

ENGLISH

WELCOME

Thank you for purchasing our new photo printer. With this high quality printer you can get the most out of

your digital photos. The Crystal Image and red-eye image optimising functions provide faultless print and

copy quality of your photos.

You will also find the following on the web site www.sagem.com:

• print drivers for PCs,

• a list of answers to frequently asked questions (FAQ).

A detailed user guide is supplied on the CD-ROM.

SAFETY INSTRUCTIONS AND RECOMMENDATIONS

Do not install your photo printer in a humid room (bathroom, laundry, kitchen, etc.), or within

1.50 m of a tap or water source, or outside. The printer should be operated within an ambient

temperature range of 10°C to 35°C. Your printer should be used at an ambient temperature of

between 15°C and 35°C for optimum printing results.

Do not set up your printer in a dusty environment as dust deposits might adversely affect the print

quality of your photos.

Only use the power supply that is supplied. Connect it to a mains outlet in compliance with the

installation instructions in this booklet and the indications stated on the identification label located

on the unit (voltage, current and frequency of the electricity network). As a precaution, in case of

danger, the mains adapters act as a disconnecting mechanism for the 230V power supply. They

should be placed near the device and should be easily accessible.

Never open the top cover when the printer is operating, as you risk breaking the film that may

result a printer malfunction.

After using the printer, wait a few moments after switching the printer off before opening it. To

avoid injury, never touch the print head.

Only use SAGEM consumables, if not you are likely to damage the equipment and invalidate the

guarantee.

The crossed-out waste bin stuck on the product means that the product belongs to the family of

electrical and electronic equipment.

In this respect, the European regulations ask you to dispose of it selectively:

- At sales points in the event of the purchase of similar equipment.

- At the collection points made available to you locally (drop-off centre, selective collection, etc.).

The CE marking certifies that the product meets the main requirements of the European

Parliament and Council directive 1999/5/CE on telecommunications terminal equipment,

regarding safety and health of users, and regarding electromagnetic interference.

The declaration of compliance can be consulted on the site www.sagem.com category "support",

or can be requested at the following address:

Sagem Communication - Customer relations department

4, rue du Petit Albi - 95800 Cergy Saint-Christophe - FRANCE

Liasse azur PE270.fm Page 1 Mardi, 18. juillet 2006 5:22 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sagem PHOTOEASY 270 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info