Bedienungsanleitung Sagemcom Phonefax 43 (Seite 32 von 44) (Englisch)

489658

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

32 Sagem · SPFX 43 · 47 · SP 4840

Connection to the Device

You can connect additional devices directly to your device.

Insert the telephone cable of the additional device into the

EXT socket (RJ-11-connection) on the device.

Externe Geräte anschließen

Direct Connection Recommended

Connection to the Telephone Line

Order of Connections

In order for the fax switch to function, the device must be

first in the series if multiple devices are connected to the

same telephone socket. Follow the correct order.

Connection to the First Telephone Socket

Using Additional Telephones

(Easylink)

Easylink

With the Easylink function you can control your device

with additional telephones. To use this function, addi-

tional telephones must be set to the tone dialling mode

(DTMF/MFV tones) (for this purpose see the operating

manual of your additional telephone).

Starting Fax Reception

If you pick up at an additional device and hear that you are

receiving a fax (whistling tone or silence), you can start the

fax reception by pressing *5 on the additional tele-

phone or pressing o on the device.

Taking Over the Line

If you pick up on an additional telephone and the device

continues to ring or attempts to receive a fax, you can dis-

connect the device from the line. Press ** on the

additional telephone.

Changing Code

Changing Easylink Codes!

1 Press OK, 54 and OK.

2 Enter the new code for starting fax reception.

3 Confirm with OK.

4 Enter the new code for taking over the line on an addi-

tional device.

5 Confirm with OK.

Using an External Answering

Machine

For the best operation, the answering machine must be

connected to the EXT socket of the device. The numbers

of rings set for the external answering machine should be

less than the one set under

FAX RINGS by at least two.

Example of the setting:

Number of Rings of the External Answering Machine .. 1

FAX RINGS .............................................................. 3

(also see Chapter Setting the Fax Switch, page 29)

External Answering Machine

If the external answering machine has a “conserving func-

tion” (i.e. a function that changes the number of rings as

soon as new messages have been recorded), deactivate this

function.

If the external answering machine records fax signals, but

your device cannot receive faxes, inspect the connection of

the external answering machine

Notice

Direct Connection Recommended

We recommend direct connection to the device

because this allows the fax switch to function

optimally and to control the additional devices.

Notice

Connection to the First Telephone

Socket

If you have multiple telephone sockets for the

same telephone line, the device must be con-

nected to the first telephone socket.

CAUTION!

Changing Easylink Codes!

Only change the codes if it is absolutely neces-

sary. The codes must begin with * or # and

must be different.

Notice

External Answering Machine

The outgoing message must be shorter than ten

seconds. Avoid music in your announcement.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sagemcom Phonefax 43 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info