Bedienungsanleitung Saitek Pro Flight Rudder Pedals (Seite 4 von 5) (Englisch)

615601

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

4 of 5 19/12/2006 16:43

that a profile is currently loaded. If you wish to unload a profile simply right-click on the controller icon and click Clear

Profile from the pop-up list of options.

If you require more detailed assistance with using the SST Programming Software, click on Help at the top of the Profile Editor and

then Manual.

GAME-SPECIFIC SETTINGS FOR THE SAITEK PRO FLIGHT RUDDER PEDALS

Flight Simulator 2004

From the main Flight Simulator 2004 splash screen, choose the Settings option, this can be found in the bottom left hand

corner of the screen.

Once in the settings page, first click on the Assignments button, this will take you to the controller assignments screen.

On the controller assignments screen you will first need to click on the Joystick Axis tab.

Next click on the drop arrow called Joystick Type next to the box in the upper right of the screen. When the arrow is

pressed a drop-down menu will appear listing all the game controllers connected to your PC. In this list you will see the

Saitek Pro Flight Rudder Pedals. Click on this controller - the menu will now disappear and the Saitek Pro Flight Rudder

Pedals will appear as the entry in the joystick type box.

Next, in the assignment list in the middle of the page, scroll down until you find the entry on the left, that says Left Brake

Axis. Next to the left brake axis there should be an entry that says Left toe, and next to this there should be a box that has

a tick in it. If it does not, hover over the box with your mousepointer and left click - a tick should now appear in the box. You

also need to carry out this procedure for the Right Brake Axis.

Once this is done click on OK to go back to the main settings screen.

From the main setting screen click on the sensitivities icon

From the Controller - Sensitivities page click on the drop arrow next to the box called Joystick Type in the upper right of the

screen. When the arrow is pressed a drop down menu will appear listing all the game controllers connected to your PC. In

this list you will see the Saitek Pro Flight Rudder Pedals.Click on this controller and the menu will now disappear and be

replaced by the Saitek Pro Flight Rudder Pedals

On the screen you will see Simple and Advance radial buttons, Make sure the Simple radial is selected - if not move your

mouse over the radial buttonand left click - a dot will appear in the radial.

Just under and to the right of the simple radial button, you will see two sliders, one marked Sensitivity - all axes and the

other marked Null zone - all axes. Move the sensitivity slider all the way over to the right and move the null zone slider

about 3% down the slider, as in the picture below. To move theslider, simply left click and hold on it and move to desired

setting.

Once this has been done click OK to go back to the main settings screen. From here you can choose an option from the

menu on the right of the page.

Lock On

We have included some tips below on configuring your Saitek Pro Flight Rudder Pedals for Lock On. For more detailed

instructions please consult your Lock On manual.

In the Input settings page make sure you have selected the Saitek Pro Flight Rudder Pedals in the devices drop down

menu.

Make sure the Input is set to Axes and not Buttons.

In the command list make sure that the only axis assigned is the Rotator 2 axis which is assigned to the rudder.

To change or delete an axis assignment from the control list, click on the control name on the left, then click either clear or

change from the top of the page.

To test the rudder axis, make sure the test panel icon on the right side of the page is set to on.

The response curve should look similar to picture below

The Axis / Slider switch should be set to Axis

Pacific Fighters, IL2 and IL2 Expansion Packs

We have included some tips below on configuring your Saitek Pro Flight Rudder Pedals for Pacific Fighters, IL2 and IL2 Expansion

Packs. For more detailed instructions please consult your manual.

To get to the controller setup page, at the main menu, click on hardware setup and then click on Input.

From the Input page you will need to click on HOTAS control.

Under the HOTAS control section you will need to assign your Saitek Pro Flight Rudder Pedals to your rudder. To do this

click in the right panel alongside the rudder pedals - when a box appears move the Saitek Pro Flight Rudder Pedals (right

pedal first) the words "Z-Axis Rotation ID2" should appear to show the Pro Flight Rudder pedals are selected as in the

picture below. Click on apply when this is set

Note - When using the in game test page the Saitek Pro Flight Rudder Pedals will not respond unless they are the only controller

plugged in - the ingame controller test screen only responds to the first controller to be plugged in.

Technical Support

Can't get your controller to work - don't worry, we're here to help you! Nearly all the products that are returned to us as faulty are

not faulty at all - they have just not been installed properly. If you experience any difficulty with this product, please first visit our

website

www.saitek.com. The technical support area will provide you with all the information you need to get the most out of your

Saitek Pro Flight Rudder Pedals Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info