Bedienungsanleitung Saitek ST110 (Seite 1 von 2) (Englisch)

615631

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

ENGLISH

1. LEARN ABOUT THE BASICS…

Thank you for purchasing Saitek’s new ST110 Joystick. With its ergonomically-designed

pistol grip and sculptured palm rest, this game controller will give you countless hours of

exciting, yet comfortable, game play! Moreover, since it was

carefully developed to fit a wide variety of hand sizes, it will

probably feel like it was made especially for you!

The ST110 was designed for IBM PC and compatible

systems, and will work with Windows

95/98-based games,

as well as your other DOS and Windows favorites. As shown

under

Features and Controls,

this joystick boasts 3 thumb-

controlled fire buttons, conveniently located at the top of the

grip, plus a fast-reacting and easily-accessible finger trigger.

You’ll also appreciate the smooth and fluid operation of the

built-in throttle. All these features add up to a joystick that’s

perfectly suited for many different adventures, including flight

simulations, racing games, and so much more!

In addition, you have complete control over the amount of

resistance in the handle. A tight adjustment may work well

for some types of games, but you might do better in others

with less tension in the joystick—experiment a little! We’ve

also included a special area in the base, where you can store the cable when not in use. This

feature can even come in handy while you’re actually playing—for an extremely neat desktop,

simply coil up and store the unused cable length between the joystick and your PC!

The instructions in this manual were designed to get you started quickly and easily. Once

you’ve gone through the initial setup for your new joystick, the games can begin!

2. …THEN DO THE CALIBRATION!

After setting up the ST110 as described under

Getting Connected,

you’ll need to calibrate

the unit in Windows

95/98, as described below.

For older DOS and Windows-based games,

start up the game, select the Joystick option within the game, and follow the instructions.

a. Click on Start, and select Settings, then Control Panel.

b. Double-click the Game Controllers icon.

If any previously-loaded controllers appear in

the Game Controllers window, they should be removed before you add the ST110 as

the active controller. To remove an existing device, highlight the controller by clicking on

it, and then click on Remove. Click on Yes to confirm.

c. Select Add under the General tab. Select the 3-axis, 4-button joystick option.

d. Click on OK, and you’re now back at the main Game Controllers window.

e. With the 3-axis, 4-button joystick highlighted, click on the Properties button to open

the Game Controller Properties dialog box.

f. Select Calibrate under the Settings tab, and follow the on-screen instructions. Make

sure that the Rudder/Pedals box is not selected.

Note that the throttle is used to

calibrate the third axis.

When the calibration procedure is complete, click on Finish.

g. Next, click on the Test tab to check out your calibration.

The joystick cursor should move

in all directions, and the button indicators should turn on when the buttons and trigger

are pressed. When the throttle is pushed all the way forward and pulled back again, the

third axis indicator in the center should go up and down.

h. After you’ve finished testing, quit by clicking on OK in the Test window, and OK in the

General window. Finally, close the Control Panel window. Now it’s time to load your

favorite game and start playing!

Note that the actual controls for the buttons, trigger, and throttle are set within each indi-

vidual game. Check your game documentation for details.

PLAY IT SAFE!

Whether you’re cruising the

skies in a jetliner, or heading for

the finish line in

an exciting race,

remember that

it’s important to

be aware of how

you’re sitting and how you’re

holding the joystick! Try not to

stay in the same position for too

long, and be sure to take breaks

now and then. Be smart—don’t

take a chance on straining your

wrists, hands, or fingers!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Saitek ST110 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info