Bedienungsanleitung Salora 28LED9112CSW (Seite 33 von 96) (Deutsch, Englisch, Holländisch, Französisch)

594914

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

English - 55 -

Switching On/Off

To Switch the TV On

Connect the power cord to a power source such as a

wall socket (220-240V AC, 50 Hz).

To switch on the TV from standby mode either:

Press the Standby button, Programme +/- or a

numeric button on the remote control.

Press the side function switch on the TV until the TV

comes on from standby.

To Switch the TV Off

Press the Standby button on the remote control or

press the side function switch on the TV until the

TV switches into standby mode.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched into standby mode, the standby

LED can blink to indicate that features such as Standby Search,

Over Air Download or Timer is active. The LED can also blink when

you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK.

On the next screen, set your preferences using the

navigation buttons and when nished, press OK to

continue.

Note: Depending on the Country selection you may be

asked to set and conrm a PIN at this point. The selected

PIN cannot be 0000. You have to enter it if you are asked

to enter a PIN for any menu operation later.

You can activate Store Mode option at this point.

This option is intended only for store use. It is

recommended to select Home Mode for home use.

If Store Mode is selected, a conrmation screen will

be displayed. Select YES to proceed. This option

will be available in Other Settings menu and can be

turned off/on later.

If Home Mode is selected, Store Mode will not be

available after the First Time Installation. Press OK

button to continue.

Aerial Installation

If you select Aerial option from the search type selection

screen, the television will search for digital terrestrial TV

broadcasts. After all the available stations are stored,

the Channel List will be displayed on the screen.

While the search continues a message will appear,

asking whether you want to sort channels according

to the LCN(*). Select Yes and press OK to conrm.

(*) LCN is the Logical Channel Number system that

organizes available broadcasts in accordance with a

recognizable channel sequence (if available).

Press Menu button to quit channel list and watch TV.

Cable Installation

If you select Cable option and press OK button on

the remote control, a conrmation screen will be

displayed. Select YES and press OK to proceed.

To cancel operation, select NO and press OK. You

can select frequency ranges from next screen. Enter

the frequency range manually by using the numeric

buttons. When nished, press OK button to start

automatic search.

Note: Searching duration will change depending on

the selected search step.

Media Playback via USB Input

You can connect a 2.5” and 3.5” inch (hdd with external

power supply) external hard disk drives or USB memory stick

to your TV by using the USB inputs of the TV.

IMPORTANT! Back up the les on your storage devices

before connecting them to the TV. Manufacturer will

not be responsible for any le damage or data loss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32

and NTFS disk formatting but recording will not be

available with NTFS formatted disks.

While formatting USB hard drives which have

more than 1TB (Tera Byte) storage space you may

experience some problems in the formatting process.

Wait a little while before each plugging and unplugging

as the player may still be reading les . Failure to do

so may cause physical damage to the USB player

and the USB device itself. Do not pull out your drive

while playing a le.

You can use USB hubs with your TV’s USB inputs.

External power supplied USB hubs are recommended

in such a case.

It is recommended to use the TV’s USB input(s)

directly, if you are going to connect a USB hard disk.

Note: When viewing image les the media browser menu

can only display 1000 image les stored on the connected

USB device.

Getting Started

First Time Installation - USB Connections

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Salora 28LED9112CSW Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info