Bedienungsanleitung Salora 55XUS4404 (Seite 13 von 33) (Englisch)

748346

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

English - 13 -

Watching Recorded Programmes

Select Recordings from the TV menu. Select a

recorded item from the list (if previously recorded).

Press the OK button to view the Options menu. Select

an option then press OK button.

Note: Viewing main menu and menu items will not be available

during the playback.

Press the Stop button to stop a playback and return

to the Recordings.

Slow Forward

If you press Pause button while watching recorded

programmes, the slow forward feature will be available.

You can use Fast Forward button to slow forward.

Pressing Fast Forward button consecutively will

change slow forwarding speed.

Recording Settings

You can configure your recording preferences using the

Settings tab in the TV>Recordings menu. Highlight

Settings tab by using Left or Right button and press

OK. Then select the desired item in the sub-menu and

set by using Left or Right button.

Start early: You can set recording timer’s starting time

to start earlier by using this setting.

End late: You can set recording timer’s end time to

end later by using this setting.

Max Timeshift: This setting allows you to set the

maximum duration for the timeshift recording. Available

options are approximate and the actual recording time

may change in practice depending on the broadcast.

The reserved and free storage space values will

change according to this setting. Make sure that you

have enough free space otherwise instant recording

may not be possible.

Auto discard: You can set the Discard type as None,

Oldest, Longest or Shortest. If it is not set to None,

you can set the Unplayed option as Included or

Excluded. These options determine the preferences

for deleting the recordings in order to obtain more

storage space for ongoing records.

Hard disk information: You can view detailed

information about the USB storage device connected

to your TV. Highlight and press OK to see and press

Back/Return to close.

Format Disk: If you want to delete all files on the

connected USB storage device and convert the disk

format to FAT32, you can use this option. Press OK

button while the Format Disk option is highlighted. A

menu will appear on the screen, requiring you to enter

the PIN(*). After you enter the PIN, a confirmation

message will be displayed. Select Yes and press OK

to start formatting the USB storage device. Select No

and press OK to cancel.

(*) Default PIN could have been set to 0000 or 1234. If you

have defined the PIN(is requested depending on the country

selection) during the First Time Installation use the PIN that

you have defined.

IMPORTANT: Formatting your USB drive will erase

ALL the data on it and it’s file system will be converted

to FAT32. In most cases operation errors will be fixed

after a format but you will lose ALL your data.

If “USB disk writing speed too slow to record”

message is displayed on the screen while starting a

recording, try restarting the recording. If you still get

the same error, it is possible that your USB disk does

not meet the speed requirements. Try connecting

another USB disk.

FollowMe TV

With your mobile device you can stream the current

broadcast from your smart TV using the FollowMe

TV feature. Install the appropriate Smart Center

application to your mobile device. Start the application.

For further information on using this feature refer to

the instructions of the application you use.

Note: Depending on model, your TV may not support this

function. The application may not be compatible with all

mobile devices. Both of the devices must be connected to

the same network.

CEC

This function allows to control the CEC-enabled

devices, that are connected through HDMI ports by

using the remote control of the TV.

The CEC option in the Settings>System>Device

Settings menu should be set as Enabled at first. Press

the Source button and select the HDMI input of the

connected CEC device from the Sources List menu.

When new CEC source device is connected, it will be

listed in source menu with its own name instead of

the connected HDMI ports name(such as DVD Player,

Recorder 1 etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected. To terminate this operation and control

the TV via the remote again, press and hold the “0-

Zero” button on the remote control for 3 seconds.

You can disable the CEC functionality by setting the

related option under the Settings>System>Device

Settings menu accordingly.

The TV supports ARC (Audio Return Channel). This

feature is an audio link meant to replace other cables

between the TV and an audio system (A/V receiver or

speaker system).

When ARC is active, the TV will mute its other audio

outputs automatically and volume control buttons are

directed to connected audio device. To activate ARC

set the Sound Output option in the Settings>Sound

menu as HDMI ARC.

Note: ARC is supported only via the HDMI2 input.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Salora 55XUS4404 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Salora 55XUS4404

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info