Bedienungsanleitung Salora CR626USB (Seite 10 von 12) (Englisch, Holländisch, Französisch)

663796

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite



CR626USB



Instruction Manual

Alarm Clock Radio with USB Charging



Please read the instruction carefully

before operating the unit.

Location of Control

1. Alarm 1 indicator

2. Alarm 2 indicator

3. USB charging port

4. DC5V jack

5. VOLUME - / ALARM 2 button

6. VOLUME + / ALARM 1 button

POWER ON/OFF / ALARM

OFF / MODE button

8. HOUR / TUNING < button

9. MINUTE / TUNING > button

10. TIME / MEMORY button

11. SNOOZE / SLEEP button

Power Supply

Mains supply : Insert the AC adaptor into a 230V AC ~ 50Hz mains outlet and the other end

of the cord into the DC 5V jack on the back of the unit.

Battery back up : The clock time and alarm (if set) can be maintained during a power

failure by 2 x AAA/ LR03 batteries (not supplied).

Once the power is restored, check the time to make sure it is accurate and re-set if necessary.

Inserting the Batteries

1. Open the battery compartment at the bottom of the unit by pressing on the catch and

removing the cover.

2. Insert 2 x AAA/ LR03 batteries (preferably alkaline batteries) into the battery compartment,

following the polarity as shown on the diagram inside the compartment.

3. Replace the battery compartment cover

Setting the clock and alarm

Setting the Clock

1. Press and hold the TIME button and the hour/minute digits will flash.

2. Use the HOUR button to set the hours. The PM indicator will light when the hour is

advanced into the PM time.

3. Use the MINUTE button to set the minutes.

4. Press the TIME button to confirm.

Setting the alarm

Before setting the alarm time, make sure the Clock has been set.

1. In standby mode, press and hold AL1 / AL2 until “0:00” flashes on the display.

2. While “0:00” is flashing, set the alarm time by repeatedly pressing HOUR / MIN.

x Press and hold HOUR / MIN respectively for fast advance.

3. Repeatedly press AL1 / AL2 to select the desired alarm mode (buzzer or radio).

Using the Alarm Function

1. To enable the alarm function, use the ALARM 1/2 buttons to select buzzer or radio. The

selected alarm mode indicator will light up.

2. The buzzer or radio will come on at the set time.

3. To stop the alarm, press the AL OFF button. The alarm will sound again the next day.

Note: While the buzzer alarm volume is fixed and cannot be adjusted, the radio alarm volume can

be adjusted to your desired level using the VOLUME buttons. To select a radio station to wake up

to, see the section on “USING THE RADIO”.

Snooze function

When the alarm sounds, press the SNOOZE button. The alarm mode indicator will flash and the

alarm will sound again

after 9 minutes. To cancel the SNOOZE function and repeat the alarm the next day, press the AL

OFF button.

Sleep Function

With this function, you can listen to the radio for up to 120 minutes, after which it will turn off

automatically.

1. When the unit is switched on, press the SLEEP button repeatedly to select the duration:

120, 90, 60, 45, 30, 15, 05 minutes or OFF.

2. At the end of the set time, the radio turns off automatically.

3. To cancel the sleep function before the end of the set time, press the button to turn

off the radio immediately.

Using the Radio

1. Press the button to turn on the radio.

2. Press and hold one of the <TUNING> buttons to start automatic tuning up/down. Release the

button when the unit is

receiving a station you would like to listen to. For manual fine-tuning, you can press it briefly to

adjust the frequency

step by step.

3. Press the button to turn off the radio.



For optimum reception

Extend and position the FM antenna to achieve optimum reception.

Preset radio stations

You can store up to 20 stations.

Use the <TUNING> buttons to search for a station. Press and hold the MEMORY button to store

the station and a number to be assigned for the preset will be displayed.



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Salora CR626USB Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info