Bedienungsanleitung Salora lcd2631 (Seite 10 von 62) (Englisch, Holländisch, Französisch)

144980

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

English - 52 -

First Time Installation

When the TV set is operated for the ﬁ rst time, the

following menu screen will be displayed:

Select your Country, Language and Text language

by using “

” or “ ” and “ ” or “ ” buttons. Press

OK or RED button to continue. To cancel, press the

BLUE button.

The following menu will be displayed during the

automatic tuning:

After APS is ﬁ nalized, the programme table will appear

on the screen. In the programme table you will see

the programme numbers and names assigned to the

programmes.

If you do not accept the locations and/or the

programme names, you can change them via the

program table.

Do not turn off the TV while initializing firs time

installation.

Input Selection

Once you have connected external systems to your

TV, you can switch to different input sources.

• Press SOURCE button on your remote control for

directly changing sources.

or,

• Select “Source” option from the main menu

by using “ ” or “ ” button. Use then “ ” or

“ ” button to highlight an input and press “ ” button

to select.

Note : You can mark desired source options by

pressing the OK button. Therefore, when

SOURCE

button is pressed, only the marked source options will

be available (except for the TV source).

Basic Operations

You can operate your TV using both the remote

control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

• Press “ ” button to decrease volume or

button to increase volume, so a volume level scale

(slider) will be displayed on the screen.

Programme Selection

• Press “ P/CH + ” button to select the next programme or

“ P/CH - ” button to select the previous programme.

Viewing Main Menu

• Press “ ”/“ ” buttons at the same time

to view main menu. In the Main menu select sub-

menu using “ P/CH - ” or “ P/CH + ” buttons and enter

the sub-menu using “

” or “ ” buttons.

To learn the usage of the menus, refer to the menu

system sections.

AV Mode

• Press the “ TV/AV ” button in the control panel on the

TV to switch between AV modes.

Operation with the Remote Control

• The remote control of your TV is designed to control

all the functions of the model you selected. The

functions will be described in accordance with the

menu system of your TV.

• Functions of the menu system are described in the

following sections.

Volume Setting

• Press V+ button to increase the volume. Press V-

button to decrease the volume. A volume level scale

(slider) will be displayed on the screen.

Programme Selection (Previous or Next

Programme)

• Press “ P - ” button to select the previous

programme.

• Press “ P + ” button to select the next programme.

03_MB25_[GB]_COST_1800UK_BRONZE9_26883W_10065853_50157196.indd 5203_MB25_[GB]_COST_1800UK_BRONZE9_26883W_10065853_50157196.indd 52 09.10.2009 15:42:5309.10.2009 15:42:53

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Salora lcd2631 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info