Bedienungsanleitung Salora PA2205CD (Seite 5 von 29) (Englisch, Holländisch, Französisch)

458953

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

POWER SUPPLY

Mains operation

Check if the mains voltage on the type plate (on the bottom of the device) corresponds to your local

mains supply. If not, consult your dealer or service organization.

1. Insert the power cord into the AC Input socket on the side of the device.

2. Plug the mains plug into the mains socket.

Caution:

In order to disconnect the device from the mains completely, the mains plug should be removed from the

mains socket completely.

Battery operation (Remote Control)

1. Open the battery compartment at the back of the remote control by pulling out the cover..

2. Insert two batteries (2 x 1.5V, Type R03 / UM4 / AAA size) with the correct polarity as shown in the

battery compartment.

3. Replace the cover.

4. If the remote is not to be used for any extended period of time, it is recommended that the batteries

are removed.

Caution:

Do not expose the batteries to excessive heat such as sunshine, ﬁre or the like.

Remove the batteries from the device when they will not be used for a long period of time.

Notes:

Batteries should not be disposed of by incineration and with household waste. Disposable batteries

should be taken to a suitable recycling centre if possible.

GENERAL FUNCTIONS

Switching the device on and off

1. Press the On/Off button to switch on the device from standby mode. The last function used is

automatically selected.

2. Switch the device to standby by pressing the On/Off button. The display shows ”GOOD BYE”

Adjusting the brightness of the display

1. Press the Dimmer button to adjust the brightness of display backlight in three levels (bright,

medium, or off).

2. The auto dimmer function automatically adjusts the intensity of display backlight to suit the

brightness of the surroundings.

Notes:

Minimum power consumption in standby mode is only achieved if the display backlight is switched off.

Changing the color of display

1. Repeatedly press the Color button to change the color of display backlight. There are 8 colors for

selection.

Selecting the function mode

1. Repeatedly press the Function button to select the function between FM Tuner, MW Tuner, CD, SD

and Auxiliary input modes.

Adjusting the volume

1. Adjusts the volume by pressing the Volume− or Volume+ button.

Muting

1. Pressing the Mute button to switch the sound on and off. The display shows “Mute”.

Switching the Ultra Bass System on and off

This function boosts the bass frequencies.

1. Press and hold the DSC/UBS button to switch the Ultra Bass System on and off. The display shows

the symbol

when UBS is switched on.

Notes:

Listening with UBS at high volume may have distortion. Recommend to use at low volume.

Selecting the sound effects

You can select the sound settings USER, CLASSIC, POP, JAZZ and ROCK. The default setting is USER.

1. Repeatedly press the DSC/UBS button to select the desired sound setting. Symbol is shown on the

display to indicate your setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Salora PA2205CD Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info