Bedienungsanleitung Salter EK5823 (Seite 2 von 2) (Englisch)

808236

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

When using electrical appliances, basic safety

precautions should always be followed.

Check that the voltage indicated on the rating plate

corresponds with that of the local network before

connecting the appliance to the mains power supply.

Children aged from 8 years and people with reduced

physical, sensory or mental capabilities or lack of

experience and knowledge can use this appliance,

only if they have been given supervision or instruction

concerning use of the appliance in a safe way and

understand the hazards involved.

Unless they are older than 8 and supervised, children

should not perform cleaning or user maintenance.

This appliance is not a toy – children should be supervised

to ensure that they do not play with the appliance.

If the power supply cord, plug or any part of the

appliance is malfunctioning or if it has been dropped

or damaged, cease using the product immediately to

avoid potential injury.

This appliance contains no user serviceable parts,

only a qualified electrician should carry out repairs.

Improper repairs may place the user at risk of harm.

Keep the appliance and its power supply cord out of

the reach of children.

Keep the appliance and its power supply cord away

from heat or sharp edges that could cause damage.

Keep the appliance away from other heat emitting

appliances.

Do not allow the power supply cord to hang over

worktops, touch hot surfaces or become twisted.

Do not immerse the electrical components of this

appliance in water or any other liquid.

Do not operate the appliance with wet hands.

Do not leave the appliance unattended whilst

connected to the mains power supply.

Do not use metal utensils to remove anything from the

toaster as this may cause injury.

Do not remove the appliance from the mains power

supply by pulling the cord; switch it o and remove the

plug by hand.

Do not pull or carry the appliance by its power supply cord.

Do not use the appliance for anything other than its

intended use.

Do not use any accessories other than those supplied.

Do not store the appliance in direct sunlight or in high

humidity conditions.

Do not move the appliance when it is in use.

Use of an extension cord with the appliance is not

recommended.

This appliance should not be operated by means of

an external timer or separate remote control system.

This appliance is intended for indoor domestic use

only. It should not be used for commercial purposes.

Never pour water on the heating element.

If this appliance falls or accidentally becomes immersed

in water, unplug it from the wall outlet immediately. Do

not reach into the water.

CAUTION:

Hot surface – do not touch the hot

section or heating components of the appliance.

WARNING: Keep the appliance away from

flammable materials. Bread may burn –

toasters must not be used near or below

curtains and other combustible materials.

Care and maintenance

STEP 1: Before attempting any cleaning or maintenance,

unplug the toaster from the mains power supply and

allow to fully cool.

STEP 2: Wipe the toaster housing with a soft, damp cloth

and dry thoroughly.

STEP 3: Remove crumbs from inside the base of the

toaster by sliding open the crumb tray following the

instructions in the section entitled ‘Crumb Tray’.

CAUTION:

Do not immerse the toaster in

water or any other liquid. Never use harsh or

abrasive cleaning detergents or scourers to

clean the toaster, as this could damage the

surface. Never place ﬁngers near or inside the

toasting slot(s). Always unplug the toaster and

allow it to cool thoroughly before attempting

to remove any bread that has become stuck

inside the toasting slot. Take care when

removing food from the toasting slot(s) to

avoid damage to the internal mechanism

and heating element. Do not allow crumbs to

build up inside the base of the toaster. Empty

the crumb tray periodically. Do not operate

the toaster without bread, as this may cause

damage to the toaster.

Instructions for use

Before ﬁrst use

Before using the toaster for the ﬁrst time, wipe the toaster housing with a soft,

damp cloth and dry thoroughly.

NOTE:

When using the toaster for the first time, a slight

smoke or odour may be emitted. This is normal and will soon

subside. Allow for sucient ventilation around the toaster.

Using the toaster

STEP 1: Place the toaster onto a ﬂat, stable, heat-resistant surface at a

height that is comfortable for the user. Make sure that the crumb tray

is pushed fully into the toaster housing and that the toasting lever is

in the upright position, with no bread or other objects inserted to the

toasting slots.

STEP 2: Plug in and switch on the toaster at the mains power supply.

STEP 3: Turn the browning control dial to the desired setting. Select 3–4

for medium brown toast.

STEP 4: Insert the bread or food to be toasted into the toasting slot(s)

and lower the loading lever until it is locked into place. Toasting will

begin when the lever is fully down.

STEP 5: When the bread reaches the desired browning level, the toast

will pop up automatically.

STEP 6: Turn the toaster o and unplug it from the mains power supply.

STEP 7: Remove the food and any crumbs from the toasting slot(s) using

heat-resistant gloves

NOTE: To interrupt toasting mid-setting, press ‘ ’. The

cancel button will remain illuminated throughout the

toasting cycle.

CAUTION: Do not toast pastries with runny

ﬁllings or frosting. Do not toast torn slices of

bread. Do not allow bread to burn.

WARNING: Never use a fork or sharp-edged

utensil to remove toast, as this may damage

the heating element or cause injury.

Using the defrost setting

STEP 1: Make sure that the crumb tray is pushed fully into the toaster

and that the toasting lever is in the upright position.

STEP 2: Plug in and switch on the toaster at the mains power supply.

STEP 3: Set the browning control dial to the desired setting.

STEP 4: Insert the frozen bread into the toasting slot(s) and lower the

loading lever until it is locked into position. Defrosting will begin once

the lever is fully lowered, and ‘ ’ has been pressed (this will remain

illuminated throughout the defrost process).

STEP 5: When the defrost setting has completed its cycle, the bread will

pop up automatically.

STEP 6: If the bread has not fully defrosted, repeat steps 4–5. To stop

the cycle, press ‘ ’.

STEP 7: Switch o and unplug the toaster from the mains power supply.

STEP 8: Remove the food from the toasting slot(s) using heat-resistant

oven gloves. Gently lift the loading lever to raise the toast out of the

toasting slots so that it can be more easily removed.

Salter EK5823 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info