Bedienungsanleitung Salus RT510RF plus (Seite 2 von 2) (Englisch)

735246

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Temporary Override Mode

Hourly temperature Override Mode (+Hr)

RT510TX thermostat pairing with the receiver Installer Mode

Manual Mode and setting setpoint temperature

Frost Protection

Sleep mode

Holiday Mode

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

Using or button set a new setpoint

temperature for override.

Using or buttons set new setpoint

temperature.

Press three buttons at the same time

for 3 seconds.

Use or button to set the number

of days for Holiday Mode.

Using or buttons set new setpoint

temperature.

Press +Hr button to set number of hours for

temperature override (e.g. to set up override

for 3 hours, press the button 3 times).

Press the + Hr button until number of hours

disappears from display.

Press button to activate the Manual Mode.

Hold down button for 3 seconds

to activate the Holiday Mode.

Press button to turn On Frost

Protection mode.

Press button again to turn

O Frost Protection mode.

Press SET button

to conrm.

Press SET button to conrm.

You can set up to 31 days.

Using SELECT button choose the parameter.

Press SET to conrm.

Using or buttons set a parameter value.

Press any key to deactivate sleep mode. Thermostat will return to the previous mode.

Thermostat is in sleep mode.

After new setpoint temperature set,

thermostat will return to the main screen.

After new setpoint temperature set,

thermostat will return to the main screen.

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

This function is available only in automatic mode (schedule). If a new setpoint temperature will be set

during the schedule - it will be maintained until next time interval starts according to programmed

schedule.

In this mode thermostat does not work according to the programmed schedule but it will maintain

selected temperature.

In this mode the “frost protection” temperature is maintained for a specic number of days.

This function is available in Automatic and Manual Mode. It is used to change the setpoint temperature

for a specied number of hours (up to 9 hours). Once that time is over, thermostat returns to previous

mode.

Turning o hourly temperature override mode before time’s up

Turning O the Frost Protection Mode

Begin the pairing process

End the pairing process

Test the pairing process

Temporary Override mode will be disabled when new schedule will be set.

To turn o the Manual Mode press button. Once the manual mode is o, the hand icon on

the thermostat will disappear.

To turn o the Holiday Mode, hold down button for 3 seconds. The airplane icon should

disappear from the display.

Temperature of the Frost Protection mode is set as default at 5°C. This temperature can be changed

in Installer Mode in d03 parameter.

When the sleep mode is activated, all thermostat functions are paused.

If you bought the RT510TX+ and RXRT510+ separately or if you want to re-pair thermostat with the

receiver, make sure that the device is disconnected from the power supply and the switches on the

receiver have been set to AUTO and ON. Then connect the receiver to the power supply and wait for

the red LED to light steadily. Then switch to the OFF position and again to ON position quickly. The red

ashing LED will conrm entering the pairing mode.

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

3 sec

3 sec 3 sec

3 sec

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

Note: If you are using the RT510RF+ pack, the pairing between the thermostat and the receiver is already done.

dxx Function Parameter Default value

d01 Temperature display increments 0.1°C or 0.5°C 0.5°C

d02 Temperature oset +/- 3.0°C 0.0°C

d03 Frost Protection setpoint temperature 5.0°C - 17.0°C 5.0°C

d04 Programmer selection 5/2 or 24 hr (7d) 52d

TEST / PAIRING

SELECT SET

Press TEST / PAIRING button to check the

connection with the receiver.

AUTO

OFF

MANUAL

1 sec

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

3 sec

Hold and buttons simultaneously

for 3 seconds to start the sleep mode.

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

Press SELECT to conrm.

Follow steps 2-5, to set next parameters.

To exit the installer mode, wait 10 seconds

- thermostat will return automatically

to the main screen.

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

WED

TEST / PAIRING

SELECT SET

WED

TEST / PAIRING

SELECT SET

WED

TEST / PAIRING

SELECT SET

WED

TEST / PAIRING

SELECT SET

WED

TEST / PAIRING

SELECT SET

WED

TEST / PAIRING

SELECT SET

WED

TEST / PAIRING

SELECT SET

WED

TEST / PAIRING

SELECT SET

SAT

Reset of the RT510+ thermostat

Press the RESET button once. You can use a paper

clip. Your thermostat will be reset and will start up

automatically.

RESET

SELECT SET

TEST / PAIRING

SELECT SET

SAT

TEST / PAIRING

SELECT SET

SAT

TEST / PAIRING

SELECT SET

SAT

TEST / PAIRING

SELECT SET

SAT

TEST / PAIRING

SELECT SET

SAT

TEST / PAIRING

SELECT SET

SAT

TEST / PAIRING

SELECT SET

SAT

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

(the pairing process takes up to 9 minutes)

Press and hold TEST/PAIRING button

for 3 seconds.

3 sec

TEST / PAIRING

SELECT SET

THU

TEST / PAIRING

SELECT SET

TEST / PAIRING

SELECT SET

Once devices are successfully paired, LED on

the receiver will go solid red. Press and hold

TEST / PAIRING button for 3 seconds to end

the pairing process.

3 sec 3

TEST / PAIRING

SELECT SET

THU

TEST / PAIRING

SELECT SET

Press TEST / PAIRING button again to

return to the main screen.

AUTO

OFF

MANUAL

1 sec

TEST / PAIRING

SELECT SET

THU

TEST / PAIRING

SELECT SET

THU

TEST / PAIRING

SELECT SET

THU

TEST / PAIRING

SELECT SET

THU

TEST / PAIRING

SELECT SET

THU

TEST / PAIRING

SELECT SET

THU

TEST / PAIRING

SELECT SET

THU

TEST / PAIRING

SELECT SET

THU

Reset of the RT510TX+ thermostat

Remove the batteries without pressing any button.

Wait 2 minutes and insert the batteries again.

Your device will be restarted.

TEST / PAIRING

SELECT

+ −

SET

TEST / PAIRING

SELECT SET

SAT

When you want to change the batteries your

device will use the internal memory to backup

your settings. You have 30 seconds to change the

batteries before losing your settings.

NOTE:

If you do not notice the “low battery” symbol displayed on the screen in time, it will shut down. In

this case, after removing the old batteries, it is necessary to wait 5 minutes before inserting the new

batteries. Otherwise, it is possible that a condenser will remain partially discharged and it can prevent

the thermostat from restarting.

Salus RT510RF plus Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info