Bedienungsanleitung Samson Airline 77 (Seite 19 von 84) (Deutsch, Englisch, Französisch, Spanisch)

623978

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Samson AirLine

10. Speak or sing into your mic at a normal performance level while slowly raising the volume of your amplifier and/or mixer until the

desired level is reached. The UM1 receiver allows you to monitor the transmission signal using standard Walkman-type 30 ohm headphones

connected to its headphone jack. Note that Unidirectional microphones (mics which pick up signal from just one direction) such as the

built-in AL1 electret condenser are less prone to feedback than other types of mics. Any feedback problems you encounter can be mini-

mized by being sure not to use the microphone directly in front of a PA speaker or by using an equalizer to attenuate (reduce) those high-

or mid-range frequencies which are causing the feedback “squealing”.

11. If you hear distortion at the desired volume level, first check to see whether the “Peak” LED on the receiver is lit. If it is not lit, make sure

that the gain structure of your audio system is correctly set (consult the owners manual of your mixer and/or amplifier for details). If the red

“Peak” LED is lit, do the following:

• IfyouareusinganAX1transmitter,usethesuppliedplasticscrewdrivertoturnitsMicrophoneInputLevelcontrol(trimpot)slowly

counterclockwise (towards the “Min” position) until the distortion disappears.

• IfyouareusinganAL1transmitterwithitsinternalelectretcondensermicrophone,simplymovethemicrophonefurtherfromyour

mouth. If you are using an AL1 with an external lavalier microphone, use the supplied plastic screwdriver to turn the Gain control

(trimpot) slowly counterclockwise until the distortion disappears.

12. Conversely, if you hear a weak, noisy signal at the desired volume level, again make sure that the gain structure of your audio system is

correctly set (consult the owners manual of your mixer and/or amplifier for details) and that the Volume control of the receiver is fully clock-

wise. If it is lit and the signal coming from the receiver is still weak and/or noisy, do the following:

• IfyouareusinganAX1transmitter,usethesuppliedplasticscrewdrivertoturnitsMicrophoneInputLevelcontrol(trimpot)slowly

clockwise (towards the “Max” position) until the signal reaches an acceptable level.

• IfyouareusinganAL1transmitterwithitsinternalelectretcondensermicrophone,simplypositionthemicrophoneclosertoyour

mouth. If you are using an AL1 with an external lavalier microphone, use the supplied plastic screwdriver to turn the Gain control

(trimpot) slowly clockwise until the signal reaches an acceptable level.

Setting Up and Using Your AirLine System

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson Airline 77 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info