Bedienungsanleitung Samson Conspiracy (Seite 14 von 72) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

630027

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Performance Mode

Trigger Pads

The Conspiracy has 25 backlit (red, green, or blue), velocity-sensitive trigger pads

with aftertouch. These pads can be used as drum pads, notes, or as trigger buttons

for clip-launching software. When you strike the pad, its note MIDI information will

be shown on the display. When you press a pad, and continue to press it, the pad will

send a channel aftertouch message depending on how hard you press the pad. The

trigger pad parameters can be adjusted in the Edit Mode. The pads are numbered

01-25, from the top left of the grid, to the bottom right.

Encoders

The Conspiracy has 14 encoders. Six of the encoders (P1-P6) are paired with sliders

to be used as channel pan controls. When you rotate the knob of an encoder, the

encoder number, MIDI channel, and continuous control (cc) data will be shown in

the display. Typically, rotating the knob clockwise will increase the value, and count-

er-clockwise will decrease the value (ranging 0–127). You can change the direction

of the data sent by the encoder by adjusting the MIN and MAX settings in the Edit

Mode.

Sliders

The Conspiracy has six sliders that are arranged as channel volume controls. There

is also a crossfader style slider that can be used with DJ software. The S1–S8 sliders

control the volume for channels 1–8, and S9 controls the master volume. When you

move a slider encoder, the slider number, MIDI channel, and continuous controller

(cc) data will be shown in the display. Typically, moving the slider up (or to the right)

will increase the value, and moving the slider down (or to the left) will decrease the

value (ranging 0–127). You can change the direction of the data sent by the slider by

adjusting the MIN and MAX settings in the Edit Mode.

Function Buttons

There are 17 backlit buttons on the Conspiracy, arranged as function buttons (F1-

F10), transport buttons (Play, Stop, Record) and arrow buttons. The buttons can

be deﬁned as note type, which send note messages when pressed, or continuous

controller (CC) type, which send control messages when pressed.

The buttons can also be set to Toggle (press the button to send an on message, and

press the button again to send the off message) or they can be set to Momentary

(when the button is pressed the button sends the initial on command, and when

released will send an off command). If the button is a note type, press the button to

send note on message and release the button to send a note off message.

The button number, MIDI channel and value will be shown in the display. The func-

tion of each button is assignable and can be adjusted in the Edit Mode.

XY-Touch Pad

The XY-Touch pad can be assigned to send two different MIDI continuous controller

(CC) values based on the direction you slide your ﬁnger (vertically or horizontally).

When you slide your ﬁnger along the pad, the CC value for the X- and Y-axis is shown

on the display. The default CC messages will increase when you slide your ﬁnger to

the right on the X-axis, and up on the Y-axis. You can change the direction of the

data sent by the slider by adjusting the MIN and MAX settings in the Edit Mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson Conspiracy Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info