Bedienungsanleitung Samson D-2500 (Seite 12 von 32) (Englisch)

629999

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Using the D2500 in MANUAL Mode

The D2500 can be used as a stand-alone basic digital

signal processor using any stored or recalled memory

parameters when set to MANUAL mode. If you want to

use all the power processing of the D2500, but you don’t

want to recall or save any presets, you can operate the unit

in Manual mode. When you press the Manual switch, the

D2500 equalizer and effects section are all available, how-

ever they will be in the state that they were last left in.

While Manual is selected, the EQ faders automatically

become reset to their physical positions so the equalizer

works the same as a standard analog graphic equalizer.

You can also engage any of the onboard effects proces-

sors. For more information on the built-in digital effects

see the section "Using the D2500 onboard effects" later in

this manual. Keep in mind that the Left and Right channels

automatically become linked in MANUAL mode.

Operating the D2500

Using the Left, Right and Link Control Switches

Since the D2500 is a two-channel unit, you can use it as

a stereo, or dual mono equalizer if you are running two

monitor mixes. Depending on the operating mode you set

up in the Global menu, you may want to have the left and

right channels operate together, or individually. The LEFT,

RIGHT and LINK switches will help you operate the D2500

easily and give you the control you need to quickly make

changes and control either one or both sides. The state of

these switches will determine which of the left and right

signals are affected by the hardware control surface.

Using the LINK switch

If you want to set the D2500 so that the phyiscal hardware

controls and all the parameter controls adjust both the

Left and Right side, press the LINK switch so that the green

LED is lit. Now, when you operate any of the controls, ei-

ther the EQ faders or the digital effects, you will be making

the same change on the left and right sides.

If you want to use the D2500 as a dual mono equalizer and

control the Left and Right sides individually, keep the LINK

switch OFF so that the green LED is not lit.

Controlling the Right Channel signal

If you want to control the EQ faders and the effects for

the right channel individually make sure the LINK switch

is OFF. Now, press the RIGHT switch to assign the hard-

ware control surface to the signal connected to the right

channel. With the RIGHT switch selected on and the LINK

switch off, the D2500 controls will edit just the right chan-

nel filters and right channel parameters, when accessing

the various menus.

Controlling the Left Channel signal

If you want to control the EQ faders and the effects for

the right channel individually, make sure the LINK switch

is OFF. Now, press the LEFT switch to assign the hardware

control surface to the signal connected to the left chan-

nel. With the LEFT switch selected on and the LINK switch

off, the D2500 controls will edit just the left channel filters

and left channel parameters when accessing the various

menus.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson D-2500 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info