Bedienungsanleitung Samson D-2500 (Seite 19 von 32) (Englisch)

629999

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operating the D2500

MIDI and D Net

For expanded system control, the D2500 uses standard

MIDI, as well as Samson’s D Net communication protocols,

to transmit and receive digital control information to and

from additional D class units, other MIDI devices, or per-

sonal computers. You can use standard MIDI cables for

IN, OUT and THRU to configure a system using traditional

MIDI protocol. For critical applications where higher speed

comunication is needed, you can install the optional

DN1, D-Net interface cards and use standard XLR cables

to configure a high-speed, bi-directional data hook-up

using Samson D-Net protocol. The MIDI and D-Net control

parameters are configured by accessing the various menus

with the MIDI switch, located on the D2500’s front panel.

You can use MIDI for controlling one D2500 with a Samson

D1500 RTA, but in larger systems, the D2500 and other D

class units should be configured with an optional DN1 D-

Net interface card for high-speed and bi-directional com-

munications. For ease of use, D-Net follows a similar user

interface as MIDI, but in reality they are very different. The

beauty of the D net interface is, not only is it 30 times fast-

er than MIDI, but both Send and Receive are covered using

a single standard XLR cable making it possible to daisy

chain several D class units together without the needs for

hubs or external mergers.. Also, the super fast D-Net bus

is fast enough to easily communicate with an external PC

for Real Time Analysis and display on an external moni-

tor. Plus as an added bonus, the error rate on the D-Net is

virtually zero, guaranteeing reliable performance during

critical applications.

When you press the MIDI switch several times you will

be paging though the various MIDI setup menu items

including MIDI enable, Channel, Omni, System Exclusive

and Program. The following section details each of these

modes and their associated parameters.

Setting the D2500 to Transmit and Receive MIDI

To enable the D2500 to send and receive MIDI data follow

these steps:

• Press the MIDI switch until that LCD reads Midi: Off.

• Use the Data Wheel to select Midi ON.

NOTE:

Once you make a edit to the MIDI set-up, the red MIDI

LED will flash indicating that a change has been made to the

original set-up. You will also see that the red STORE LED is

illuminated

• To keep the new changes, press the STORE button and

you will exit the MIDI mode and both the STORE and

MIDI the LED’s will turn off.

Setting the D2500 to Transmit and Receive Data Using

D-Net

In larger systems, the D2500 and other D class units can

be configured with an optional DN1 D Net interface card

for high-speed communications. D Net follows a simi-

lar protocol as MIDI, only at a much higher data rate. As

mentioned in the previous section, the beauty of the D

net interface is, not only is it 30 times faster than MIDI, but

both send and receive are covered using a single standard

XLR cable.

To enable the D2500 to send and receive D-Net data fol-

low these steps:

• Press the MIDI switch until that LCD reads: Midi ON.

• Use the Data Wheel to select D. Net.

•

Press Store.

Now that you have enabled the D2500 for D-Net, as

described in the previous section, you can select addition-

al MIDI parameters that may be necessary for your exact

application or system set-up. The D2500’s MIDI has three

basic modes of operation Channel, Omni and System

Exclusive. The D2500 can operate in any of these three

MIDI modes.

One of the most used MIDI modes is Channel MIDI, which

allows you to assign up to sixteen different devices to indi-

vidual MIDI channels 1 through 16.

Selecting a MIDI Channel

You can program the D2500 to receive MIDI messages on

a specific MIDI channel by following the next steps.

• Press the MIDI switch until the LCD reads: M. Channel 1.

• Use the Data Wheel to select:

M. Channel 1

- 16.

• To keep the new changes, press the STORE button and

you will exit the MIDI mode and both the STORE and

MIDI the LED’s will turn off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson D-2500 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info