Bedienungsanleitung Samson D-3500 (Seite 12 von 28) (Englisch)

630000

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Using the Filter Control Knobs

The D3500’s front panel features a hardware control sec-

tion with encoder knobs that allow you to make quick

real time adjustments to FREQUENCY, BANDWIDTH and

GAIN for any of the 30 filters. You can adjust any filter that

has been set by an internal preset using the Filter Control

Knobs. You can also operate a filter in MANUAL mode and

use the Filter Control Knobs to quickly set the EQ band by

hand, and by ear.

Since each of these filter parameters can be set manually

or by recalling a preset from the internal memory, the

parameters can change quickly so you’ll need to know

how the new filter parameters are set. To handle this prob-

lem, the D3500’s filter control knobs have LED light rings

around the encoders, which when lit, indicate the position

of the filter parameters. This gives you a graphical repre-

sentation of the how the equalizer band would look on a

traditional analog parametric eq.

It’s easy to assign any filter to the encoder knobs by simply

pressing any of the Filter Selection buttons. Follow the

simple steps below to set a filter to Manual and then use

the Filter Control Knobs to adjust the band.

• Press the BYPASS switch so that the LED is off, indicat-

ing the D3500’s digital effects are engaged.

• You will probably want to start with a default preset,

so press the LOAD switch. The LED will flash indicating

the D3500 is ready to load a preset.

• Use the Data Wheel to select Preset 00.

Note

reset 00 is a factory default set up that CANNOT be

overwritten.

Operating the D3500

• Press the LINK switch so that the green LED lights,

indicating the left and right channels are linked

together.

• Select the active filters by pressing the Channel 1

Filter Select Switch. At this point you will notice that

the

green Selection LEDs for filter 1 is lit on both

channels. This indicates that the filters are ready to be

set-up and engaged.

• To set these filters to MANUAL mode, press the EQ

switch until MODE is displayed in the main LCD.

• Use the Data Wheel to select Mode 1; (MANUAL).

• Now, simply move the GAIN knob and you'll see the

ACTIVE LED for the selected filters light up indicating

the filters are engaged. You will also notice that GAIN

and the associated value now appear in the LCD win-

dow.

•

Next, you can use the FREQUE

NCY knob to set the

center frequency of the filter,

which can be adjust

from 20 Hz - 20 kHz. When you adjust the knob you

will see FREQUENCY and the associated value in the

LCD window.

• Now, you can experiment by changing the filter

BAN

DWIDTH from 1/60th of an octave to 10 octaves.

When you adjust the knob you will see

BAN

DWIDTH

and the associated value in the LCD window.

Note:

You can quickly return one or more selected filters back

to a GAIN of 0 dB by pressing the RESET switch. Be sure that

the green LEDs on the Filter Select switches for the filters that

you want to return to 0 dB are lit, then press RESET.













D3500_ownman_v1_2.indd 10 9/4/05 5:20:07 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson D-3500 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info