Bedienungsanleitung Samson D-3500 (Seite 17 von 28) (Englisch)

630000

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

The HP / LP Switch Has Four Clicks!

Click Menu Function Value

1 Lowpass high Cut Filter

2 kHz - 20 kHz

2 Lp-Order Filter Slope 0, 6, 12, 18 per Octave

3 Highpass low Cut Filter

20 Hz - 200 Hz

4 HP-Order Filter Slope 0, 6, 12, 18 per Octave

• Press the HP / LP switch so that the yellow LED is lit.

• Engage the effect by pressing the IN / OUT switch

until the yellow LED lights.

• To set the High-pass filter press the HP / LP switch

until the LCD display reads; High-pass.

• Now, use the Data Wheel to set the frequency from 20

Hz to 200 Hz.

• Press the HP / LP switch again and you will see the

menu to set filter Order, or slope. The menu will read

HP-Order.

• Use the Data Wheel to choose a slope of either 6dB,

12dB, or 18 dB.

Note:

If you want to use the Low Pass filter but not the High

Pass filter set the Low Pass filter slope to 0 dB.

• To set the Low-pass filter, press the HP / LP switch

until the LCD display reads; Low-pass.

• Now, use the Data Wheel to set the frequency from 20

Hz to 20 kHz.

• Press the HP / LP switch again and you will see the

menu to set filter Order, or slope. The menu will read

LP-Order.

• Use the Data Wheel to choose a slope of either 6dB,

12dB, or 18 dB.

Note:

If you want to use the High Pass filter but not the

LowPass filter set the High Pass filter slope to 0 dB.

Using the LIMITER for Basic Speaker Protection

In order to help you protect your speaker system, the

D3500 employs a digital Limiter. When engaged, the

digital Limiter will prevent signals from reaching outputs

levels over a desired point. The D3500’s Limiter has a vari-

able Threshold level, which is the point the limiter circuit

begins to attenuate the system. The Limiter also has a

variable Release time, which is the time the limiter circuit

takes to return the signal to the original level.

The LIMITER Switch Has Two Clicks!

Click Menu Function

Value

1 Lim. Thr. Threshold

0 to -100 dB

Lim. Rel.

Release Time

50 to 100

% (equiv

alent to 2 to 15 sec-

onds)

To operate the D3500 digital LIMITER follow these simple

steps.

• Press the LIMITER switch so that the yellow LED is lit.

• Now, engage the effect by pressing the IN / OUT

switch until the yellow LED lights.

• To access the Threshold parameter, press the LIMITER

switch until you see the menu, Lim. Th. The LIMITER

Threshold can be set from –100 dB to 0 dB.

• To access the Release parameter, press the LIMITER

switch until you see the menu, Lim. Rel. The LIMITER

Release time can be set from 50 to 100

% (equivalent

to 2 to 15 seconds).















Operating the D3500















D3500_ownman_v1_2.indd 15 9/4/05 5:20:12 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson D-3500 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info