Bedienungsanleitung Samson Graphite 25 (Seite 19 von 36) (Englisch)

630024

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Graphite 25 · USB/MIDI Keyboard Controller

Selecting Velocity Curve for the Trigger Pads

Press the Pad Vel key to select a velocity curve for the trigger pads. “P.Curve” will appear in the Op-

eration area of the display with its current velocity curve number in the data area . The Operation

area will then change to show the current velocity curve. Use the DATA +/– buttons or enter the

number by pressing the numerical keys on the keyboard. Press the ENTER key or the ENTER but-

ton to conrm your setting and save it. The name of the velocity curve will be updated. The value

display will stop blinking. Selectable curves are the same as keyboard velocity curves.

Switch the Local Control

The USB out from port 1 or 2 can be transmitted through the MIDI Out jack. This is controlled

by the local setting. Press the Local key to switch the local control On/O. “Local” and its current

status will appear in the Operation area of the display, and ash. Press the DATA + (or numerical

key 1) to turn Local Control on and DATA – (or numerical key 0) to turn Local Control o. Press the

ENTER key or the ENTER button to conrm your setting and save it. When local is on, “Local” will

appear in the Status Indicator area on the right side of the screen.

Pedal Setup

Press the pedal to assign a control code for the pedal. “Pedal” will appear in the Operation area of

the display with the value of the current control in the data area. The value is also shown and will

blink under the Val tag on the second row of the display. Use the DATA +/– buttons to change the

value or enter the data by pressing the numerical keys on the keyboard. Press the ENTER key or

the ENTER button to conrm your setting and save it. The value display will stop blinking.

Preset Reset

Press the Preset key to reset to the factory default setting. “Reset No” will appear in the Operation

area of the display and “No” will blink. Press DATA + (or numerical key 1) to switch it to “Yes” or

DATA – (or numerical key 0) to switch it “No.” Press the ENTER key or the ENTER button to conrm

your decision. When the Yes is conrmed, the Reset sign will appear in the Status Indicator area

on the right side of the screen and “Loading…” will appear in the Operation area of the display.

After the reset is nished, the display will show “Reset OK”.

Mute Control

Messages for the operations of the encoders and slider are normally transmitted immediately

with movement of the controller. You can set the Graphite so that it transmits all encoder and

slider movements simultaneously. This is controlled by the MUTE setting. Press the Mute key to

switch the mute control On/O. “Mute” and its current status will appear in the Operation area of

the display and ash. Press DATA + (or numerical key 1) to turn Mute Control on and DATA – (or

numerical key 0) to turn Mute Control o. Press the ENTER key or the ENTER button to conrm

your setting. When mute is on, “Mute” will appear in the Status Indicator area on the right side of

the screen.

Setup Mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson Graphite 25 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info