Bedienungsanleitung Samson L2400 (Seite 11 von 28) (Englisch)

624006

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Controls and Functions

24BIT DIGITAL EFFECT SECTION - continued

24 – TO AUX 4- Effects Return Control

The TO AUX 4 control is used to adjust the level of the

effects from the built-in digital Multi-effect that’s being

sent to the AUX 4 monitor bus. This allows you to add the

DSP effects to the signal in your monitor speakers. Turn

this knob up if you want to hear the effect in the AUX 4

monitor mix.

25 – EFX ON switch

The EFX ON switch is used to turn the internal Digital

Effect on and off. The effects are by-passed when the

switch is in the out position and the Effects Display shows

two dashes.

26– PEAK - LED

The L2400 and L3200’s DSP section also includes a

PEAK LED which when illuminated, indicates that

the signal is peaking or overloading. To reduce

distortion, lower the EFX controls to keep this LED

from staying on.

27 - PFL EFX RTN 1 (Pre Fader Listen) - switch

The EFX RTN 1’s PFL, or Pre Fader Listen switch allows you

to listen, or “solo” the EFX 1 Return or group of channels

in the headphones. When a stereo input channel’s PFL

switch is pressed down, the EFX RTN 1 signal is assigned

to the solo bus and can be heard in headphones plugged

in to the PHONES connector located in the front panel

jack field. Since the signal is sent pre fader, you can hear

the signal regardless of the position of the EXF RTN 1

volume Fader. This allows you to listen a EFX RTN 1 by

itself: (let's say) to see if a reverb is long enough, or to cue

up an echo without having to play it through the main PA.

28 - 1-2 RTN1 Group Assign switch

The 1-2 Group assign switch is used to assign the

DSP RTN1 to the 1-2 Group output bus.

29 – 3-4 RTN 1 Group Assign switch

The 3-4 assign switch is used to assign the DSP RTN

1 to the 3-4 Group output bus.

30 –MAIN Assign switch

The MAIN assign switch is used to assign the DSP

RTN 1to the left and right stereo bus outputs.

31- RTN1 - Fader Level Control

The RTN1 Fader control adjusts the level of the DSP 1

effects in the MAIN left and right mix.

33 - AUX 1 - 8 Master Send Fader

Each of the L Series AUX 1-8 buses has a master con-

trol knob, which is used to adjust the overall level

of that AUX bus output. The Aux 1-8 signals from

mono and stereo input channels, along with the DSP

returns are mixed together and sent to the AUX 1-8

Output respectively. Use the AUX 1-8 level controls

to set the amount of signal being sent to Aux 1-8

Output.

34 - AUX 1 - 8 AFL switch

The AUX 1-8 master send output’s AFL, or After Fader

Listen switch allows you to listen, or “solo” an AUX

send in the headphones. When any the AUX 1-8 AFL

switch is pressed down, that Aux’s signal is assigned

to the solo bus and can be heard in headphones

plugged in to the PHONES connector located in the

front panel jack field. This allows you to listen to an

AUX send by itself, let’s say, to check that a signal is

not distorted before it gets to the power amplifier.

Since the signal is sent after the Aux 1 level fader,

you hear the signal with the added gain from the

AUX 1 Level control.

AFL

EFX 2

EFX 1

AUX 6

AUX 5

AUX 4

AUX 3

AUX 2

AUX 1

AUX SEND

Master Auxiliary Send Section

32 – Effect 2 control strip

Same as functions 18 – 31 for DSP Multi-effects number 2.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson L2400 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info