Bedienungsanleitung Samson MDR1248 (Seite 18 von 28) (Englisch)

23499

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

mix. You can also pan the channels hard left and right to cre-

ate two mono buses. Keep in mind that using the 3/4 switch

mutes the channel from the main mix, so use the ALT 3/4 bus

for a separate stereo, or two mono, zone mixes.

G - CONTROL ROOM LEFT/RIGHT OUTPUT

The Control Room outputs are 1/4-inch balanced jacks used

to connect a studio monitor system. The Control Room out-

puts have the same output as the L/R MIX, however, the level

can be adjusted independently from the main mix using the

C ROOM/HEADPHONES control.

H - MAIN MIX LEFT/RIGHT 1/4-INCH OUTPUTS

In a live sound application, the LEFT/ RIGHT MIX outputs are

1/4-inch balanced jacks used to connect a power amplifier

or powered speakers. In a recording application, the LEFT/

RIGHT MIX outputs are used to connect to the inputs of a

stereo device such as computer sound card, DAT, or cassette

recorder.

I - MAIN MIX LEFT/RIGHT XLR OUTPUTS

In a live sound application, the LEFT/ RIGHT MIX outputs are

connected to a power amplifier or powered speakers. In a

recording application, the LEFT/ RIGHT MIX outputs are used

to connect to the inputs of a stereo device such as computer

sound card, DAT, or cassette recorder.

J - AUX RETURN 1 LEFT/RIGHT

The AUX RETURN 1 LEFT/RIGHT are stereo inputs that are

generally used to connect the outputs of an effects processor,

but can also accept the signal from any line level source like

a keyboard, recorder and even another mixer. The signal con-

nected to the AUX RETURN 1 LEFT/RIGHT will feed the main

LEFT/RIGHT MIX bus. The overall level is controlled by the

AUX RET 1 knob located in the master section on the front

panel. Use the LEFT/MONO input when connecting a mono

input signal to the AUX RETURN.

K - AUX Send 1

The signal present at the AUX1 output is sent from the AUX1

bus, which is fed from all the AUX 1 sends on the input chan-

nels. The AUX 1 output can be used as the EFFECTS SEND

bus in a live sound situation by connecting the output to an

external effects device.

MDR1248 and MDR1688 Input and Output Connections

L - AUX RETURN 2 LEFT/RIGHT

The AUX RETURN 2 LEFT/RIGHT are stereo inputs that are

generally used to connect the outputs of an effects proces-

sor, but can also accept the signal from any line level source

like a keyboard, recorder and even another mixer. The signal

connected to the AUX RETURN 2 LEFT/RIGHT will feed the

main LEFT/RIGHT MIX bus. The overall level is controlled by

the AUX RET 2 knob located in the master section on the

front panel. Use the LEFT/MONO input when connecting a

mono input signal to the AUX RETURN.

M - AUX Send 2

The signal present at the AUX 2 output is sent from the AUX

2 bus, which is fed from all the AUX 2 sends on the input

channels. The AUX 2 output can be used as the MONITOR

MIX bus in a live sound situation by connecting the output to

a power amp and monitor speaker.

N – FOOTSWITCH - 1/4-inch jack

With a footswitch connected to this jack, you can turn on

and off the on-board digital effects by simply stepping on

the footswitch.

0 - HEADPHONE OUTPUT

You can connect a standard pair of stereo headphones to

the PHONES jack and depending on the position of the 2T

TO CR switch, you will hear either the 2-Track input or the

MAIN mix.

P - 2TR INPUT

The MDR1248 and MDR1688 features dual RCA connectors

for the left and right 2-track input. You can use these inputs

to connect a CD, Cassette, Mini Disk, DAT or the output from

a computer sound card. To listen to the input connected to

the 2T IN, be sure to check the position of the 2T To Mix and

2T TO CR switches. For more information on using the 2 Track

inputs, see the section “PLAYING BACK A CD USING 2T TO MIX ”

on page 18 of this manual.

Q - 2TR OUTPUT

If you want to record the mix from your MDR1248 and

MDR1688, you can use the 2-track OUT connectors. The

dual RCA connectors can be connected to a CD, Cassette,

Mini Disk, DAT or even the input of a computer sound card

for hard disk recording. For more information on using the 2

Track outputs, see the section “RECORDING A MIX FROM THE

MDR1248 and MDR1688 ” on page 18 of this manual.

.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson MDR1248 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samson MDR1248

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info