24757
21
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
Operating the MDR16
19
USING THE DIGITAL EFFECTS
The MDR16 features a built-in, high quality, 24 BIT Digital Signal Processor offering studio grade effects. The DSP features
clean Delay, lush Reverbs and multi-effects such as Chorus + Delay or Chorus + Reverb. The following details the opera-
tion of the internal DSP effects:
1. Connect a mic or instrument to the desired channel, and adjust the volume and equalizer to your liking.
2. Now select the desired preset on the DSP selection switch. Set the DSP selection switch to one of the following effects:
1 - Large Hall
2 - Medium Hall
3 - Large Room
4 - Vocal Room1
5 - Vocal Room 2
6 - Chorus + Reverb
7 - Chorus + Delay
8 - Stairwell
4. Once you have selected the desired effect preset, raise the AUX 2/DSP
control on the channels you wish to apply the digital effect to.
5. Now use the DSP1-2, DSP 3-4 and DSP to AUX1 knob in the master section to adjust the effects return level. These con-
trol is the overall level control for the DSP effects processor.
NOTE
:
If the effect sound is distorted even though the Aux RETURN 2 is turned down low, lower the AUX2/DSP controls of each
channel.
SENDING AN INDEPENDENT MIX TO THE MONITOR SPEAKERS
The MDR16’s AUX1 auxiliary send can be used to feed a separate set of amplifiers and loudspeakers for stage monitors.
This lets you build one stereo mix for the amplifiers and speakers facing the audience and another mono mix for the
amplifiers and monitor speakers facing the musicians.
1. Raise the AUX1 controls for the channels that you wish to hear from the monitor speakers.
NOTE:
With the Pre/Post switch in the up position, the AUX1/MON controls are "PRE-FADER SENDS", which means
they are not affected by the FADER level settings of each channel. This allows you to create a mix for the monitors that
is independent of the main LEFT and RIGHT MIX.
2. In order to get the most gain from your monitor mix, use an external graphic equalizer (like a Samson S curve 131) to
cut out any frequencies that cause feedback
.
























































































































































21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Samson MDR16 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info