Bedienungsanleitung Samson PB10 (Seite 4 von 16) (Englisch)

629784

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Introduction

Congratulations on purchasing your Samson PowerStrip, PowerBrite, or PowerBrite

Pro! This manual covers three products: the PowerStrip PS10; the PowerBrite PB10;

and the PowerBrite PB10Pro. All three of these single-space rack units provide

multiple outlets for reliable power distribution with 3-point surge and spike

protection, plus RF (Radio Frequency) filtering. The three products differ in that the

PowerBrite and PowerBrite Pro also provide dual front-panel LED lamps (in retractable

cylinders), with dimmer control, which can be used to fully illuminate your entire

rack of gear. In addition, the PB10 and PB10Pro also provide a rear-panel USB socket

to use with the included LED gooseneck lamp so you can see the back of your

gear. For advance control, the PowerBrite PB10Pro's feature front-panel voltmeter

and ammeter, each with their own large LED display so you can easily monitor

the condition of your power source. The steel chassis and solid build construction

makes the PowerStrip and PowerBrite series reliable tools on the road or in fixed

installations.

In this manual, you’ll find a more detailed description of the features of your

PowerStrip PS10, PowerBrite PB10, or PowerBrite PB10Pro, as well as instructions for

its use and complete specifications. You’ll also find a warranty card enclosed—don’t

forget to fill it out and mail it in! This will enable you to receive online technical

support and will allow us to send you updated information about other Samson

products in the future. Also, be sure to check out our website (www.samsontech.com)

for complete information about our full product line.

With proper care and adequate air circulation, your PowerStrip PS10, PowerBrite PB10,

or PowerBrite PB10Pro will operate trouble free for many years. We recommend you

record your serial number in the space provided below for future reference.

Serial number: __________________________________

Date of purchase: ________________________________

SPECIAL NOTE: Should your PowerStrip PS10, PowerBrite PB10, or PowerBrite PB10Pro

ever require servicing, a Return Authorization number (RA) is necessary. Without this

number, the unit will not be accepted. If purchased in the United States, please call

Samson at (516) 364-2244 for a Return Authorization number prior to shipping the

unit. If you purchased your Samson product outside the United States, please contact

your local distributor for warranty information and service. Please retain the original

packing material and, if possible, return the unit in its original carton and packing

materials.

WARNING: Though the PowerStrip PS10, PowerBrite PB10, and PowerBrite PB10Pro

all provide both surge and spike protection, they are not designed to protect

against major overload situations such as lightning strikes or connection to incorrect

voltage supplies. In the event of either occurrence, unplug all connected equipment

immediately and have your PowerStrip PS10, PowerBrite PB10, or PowerBrite PB10Pro

evaluated by Samson Technical Support or by an authorized Samson service center

before using it again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson PB10 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info