Bedienungsanleitung Samson XPL100 (Seite 6 von 64) (Deutsch, Englisch, Französisch, Spanisch)

629793

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

System Features

The Samson Expedition Pro system uses state-of-the art

technology to bring a revolutionary new degree of flex-

ibility and portability to professional audio. Its main fea-

tures include:

• A built-in telescoping handle and locking wheels that

make it easier than ever before to transport your audio

system.

• All Expedition Pro enclosures are lightweight and com-

pact yet exceptionally durable and roadworthy. Injection-

molded with Polypropylene, they feature substantial inter-

nal bracing to support a nearly 1/2" thick side wall con-

struction, making them strong and rigid enough to allow

maximum energy to be delivered to the sound output. In

addition, a steel grill and scuff-resistant textured finish

makes for a rugged speaker enclosure that will deliver

dependable performance in even the most demanding

environments.

• The low frequency section includes a custom designed

12-inch low frequency driver with a 2.5-inch Kapton

Former voice coil and 50 ounce barium ferrite magnet for

accurate and super-tight bass response.

• A high frequency section that delivers clear, sweet top

end thanks to its 1-inch compression driver with a special-

ly designed 34mm titanium diaphragm for linear response

and an elliptical wave guide horn design that reduces

nearly all sonic diffraction.

• A tilt position that allows the Expedition Pro to be used

as an onstage wedge monitor.

• Integral 1 3/8" pole-mount receptacle and convenient

fly points allow the Expedition Pro to be pole-mounted or

“flown” using standard PA hardware.

• The XPL100 is a passive cabinet that can be used with

any power amplifier rated at up to 250 watts into 8 ohms.

It requires no power and provides dual Speakon™ and 1/4" connectors that allow

multiple XPL100s to be daisy-chained where extended coverage is required.

• The XPL200 contains a 250 watt, light-weight, “class D” power amplifier and

advanced crossover. Dual balanced XLR connectors allow daisy-chaining of mul-

tiple Expedition Pro enclosures, and a limiter circuit assures a clean output even

when you’re pushing the XPL200 to maximum levels. In addition, there are three

stages of speaker protection, including relay switching for power on and off.

• The XPL300 includes all the features of the XPL200, and adds a flexible four-chan-

nel stereo mixer that provides two monophonic and one stereo mic/line channels

with dual XLR and 1/4" connectors. In addition, separate dual phono connec-

tors allow you to hook up an external cassette, MP3 or CD player. Each mixer

channel includes two-band equalization and independent volume control, and

there’s even built-in digital multi-effects processor for the addition of ten differ-

ent reverb, delay and chorus presets. Balanced left and right XLR outputs allow

daisy-chaining of multiple Expedition speakers (with a mono/stereo switch that

allows operation in either mode), and a VU meter enables you to continuously

monitor output levels. The XPL200 and XPL300 also include a meter that shows

battery level when used with the optional RB 2030 rechargable battery cartridge

(see below).

SAMSON

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson XPL100 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info