Bedienungsanleitung Samsung 2032MW (Seite 53 von 67) (Englisch)

57283

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

493.0 X 419.0 X 209.0 mm / 19.4 X 16.5 X 8.2 inch / 5.3 kg / 11.7 lbs (With Stand)

493.0 X 368.0 X 70.0 mm / 19.4 X 14.5 X 2.8 inch (Without Stand)

Environmental considerations

Operating Temperature: 50°F ~ 104°F(10°C ~ 40°C)

Humidity: 10 % to 80 %, Non-condensing

Storage Temperature: -4 °F ~113 °F(-20 °C ~ 45 °C)

Humidity: 5 % to 95 %, Non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the

computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor

installation will proceed automatically, unless the user wishes to select alternate settings.

Dot Acceptable

TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm(one

millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be

bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it

without uneasiness.

zFor example, the number of TFT LCD sub pixels contained in this product are 5,292,000.

Note: Design and specifications are subject to change without prior notice.

Class B Equipment (Information Communication equipment for residential use)

This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in

all areas including common residential areas.

(Class B equipment emits less electromagnetic waves than Class A equipment.)

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by

switching your monitor into a low-power mode when it has not been used for a certain amount of time. The

monitor automatically returns to normal operation when you press a key on the keyboard. For energy

conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The

PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use the

software utility installed on your computer to set up this feature.

State Normal Operation Power saving mode Power off

Power Indicator Blue Blue, Blinking Black

Power Consumption Less than 45 W Less than 2 W Less than 2 W

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will

be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on.

Refer to the video card manual and adjust the screen as follows.

Display Mode

Horizontal

Frequency

(kHz)

Vertical

Frequency

(Hz)

Pixel Clock

(MHz)

Sync Polarity

(H/V)

IBM, 640 x 350 31.469 70.086 25.175 +/-

IBM, 640 x 480 31.469 59.940 25.175 -/-

IBM, 720 x 400 31.469 70.087 28.322 -/+

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung 2032MW Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung 2032MW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info