Bedienungsanleitung Samsung 2032MW (Seite 62 von 67) (Englisch)

57283

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

TAIWAN 0800-329-999 http://www.samsung.com/tw

VIETNAM 1 800 588 889 http://www.samsung.com/vn

Middle East & Africa

SOUTH AFRICA 0860 7267864 (SAMSUNG) http://www.samsung.com/za

U.A.E 800SAMSUNG (7267864)

8000-4726 http://www.samsung.com/mea

Terms

nc Si

nal

Sync (Synchronized) Signals refer to the standard signals that are required to display desired colors on

the monitor. They are divided into Vertical and Horizontal Sync Signals. These signals display normal

color images by the set resolution and frequency.

Types of Sync Signals

Separate This is a scheme of transmitting individual vertical and horizontal sync signals to

the monitor.

Composite This is a scheme of combining vertical and horizontal sync signals into one

composite signal and transmitting it to the monitor. The monitor displays the

color signals by separating the composite signal into original color signals.

Dot Pitch

The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the

resolution. The distance between two dots of the same color is called the 'Dot Pitch'. Unit: mm

Vertical Frequency

The screen must be redrawn several times per second in order to create and display an image for the

user. The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate. Unit:

Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz.

Horizontal Frequency

The time to scan one line connecting the right edge to the left edge of the screen horizontally is called

the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit:

kHz

Interlace and Non-Interlace Methods

Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-

Interlace method while showing odd lines and then even lines in turn is called the Interlace method.

The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace

method is the same as that used in TVs.

Plug & Play

This is a function that provides the best quality screen for the user by allowing the computer and the

monitor to exchange information automatically. This monitor follows the international standard VESA

DDC for the Plug & Play function.

Resolution

The number of horizontal and vertical dots used to compose the screen image is called the 'resolution'.

This number shows the accuracy of the display. A high resolution is good for performing multiple tasks

as more image information can be shown on the screen.

Example: If the resolution is 1680 x 1050, this means the screen is composed of 1680 horizontal

dots (horizontal resolution) and 1050 vertical lines (vertical resolution).

RF Cable

round signal cable generally used for TV antennas.

Satellite Broadcastin

Broadcasting service provided via satellite. Enables high picture quality and clear sound throughout the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung 2032MW Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung 2032MW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info