Bedienungsanleitung Samsung BD-F5800 (Seite 45 von 383) (Englisch)

522874

Zoom out

Zoom in

Vorherige Seite

1/383

Nächste Seite

English 45

05 Setup

Wired Network



Setting Up a Wired Connection - Auto

1. Press the ▲▼ buttons to select Wired.

2. Press the ENTER button.

The Network Status screen appears. The

product connects to the network after the

network connection is verified.



Setting Up a Wired Connection - Manual

If you have a static IP address or the Auto Setting

does not work, you’ll need to set the Network

Settings values manually.

To view your Network Settings values on most

Windows computers, follow these steps:

Windows XP

1. Right click the Network icon on the bottom

right of the Windows desktop.

2. In the pop-up menu, click Status.

3. On the dialog that appears, click the Support

tab.

4. On the Support tab, click the Details button.

The Network settings are displayed.

Windows 7

1. Click the Network icon on the bottom right of

the Windows desktop.

2. In the pop-up menu, click Network and

Sharing Centre.

3. On the dialog that appears, click the Local

Area Connection or Wireless Network

Connection depending on your network

connection.

4. On the Support tab, click the Details button.

The Network settings are displayed.

3. Insert the CAM with the “CI CAM with CI or

CI+ CARD” into the common interface slot,

in the direction of the arrow so that it aligns

parallel with the slot.

4. Check if you can see a picture on a scrambled

signal channel.

✎

NOTE

This Device is work with CI and CI+ CAM.

But in case of some local DVB-T association, this

device doesn't have perfect compatibility with all

kinds of CAM.

If there is a problem, pull the CAM CARD out of the

Set and insert it into the slot again.

Network

Before you begin, contact your ISP to find out

if your IP address is static or dynamic. If it is

dynamic, and you are using a wired or wireless

connection, we recommend using the Auto

procedures. If you are using a wireless connection

and your router has the capability, you can use

WPS(PBC) or One Foot Connection.

If your IP address is static, you must use the

manual set up procedure for both wired and

wireless connections.

Network Settings

To begin setting up the network connection for

your product, follow these steps:

1. In the Home menu, press the ◄► buttons to

select Settings, and then press the ENTER

button.

2. Press the ▲▼ buttons to select Network, and

then press the ENTER button.

3. Press the ▲▼ buttons to select Network

Settings, and then press the ENTER button.

4. Press the ▲▼ buttons to select Wired,

Wireless (general), WPS(PBC) or One Foot

Connection, and then press the ENTER

button.

5. If you have a wired network, go to Wired

Network below. If you have a wireless

network, go to Wireless Network on pages

46~49.

Settings

Display

Audio

Channel

Network

System

Language

Security

General

Support

Network Settings

> Move " Enter ' Return

Select a network connection type.

Wired

Wireless

(general)

WPS(PBC)

One Foot

Connection

Connect to the network using a LAN cable. Please

make

sure that the LAN cable is connected.

02063N-BD-D8200,D8500-XN-ENG-.indb 45 2012-01-12 오전 11:38:29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung BD-F5800 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info