Bedienungsanleitung Samsung BD-J5900 (Seite 13 von 26) (Englisch)

576283

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

NOTES

✎

Be sure to select the correct Digital Output or

you will hear no sound or just loud noise.

If the HDMI device (AV receiver, TV) is not

compatible with compressed formats (Dolby

Digital, DTS), the audio signal outputs as PCM.

Regular DVDs do not have BONUSVIEW audio

and Navigation Sound Effects.

Some Blu-ray Discs do not have BONUSVIEW

audio and Navigation Sound Effects.

If you play MPEG audio soundtracks, the audio

signal outputs as PCM regardless of your

Digital Output selections (PCM or Bitstream).

If your TV is not compatible with compressed

multi-channel formats (Dolby Digital, DTS), the

player may output PCM 2ch downmixed audio

even though you selected Bitstream (either Re-

encoded or Unprocessed) in the setup menu.

If your TV is not compatible with PCM sampling

rates over 48kHz, the player may output 48kHz

downsampled PCM audio even though you set

PCM Downsampling to Off.

PCM Downsampling

Lets you choose to have 96KHz PCM signals

downsampled to 48KHz before they are

outputted to an amplifier. Choose On if your

amplifier or receiver is not compatible with a

96KHz signal.

Dynamic Range Control

Lets you apply dynamic range control to

Dolby Digital, Dolby Digital Plus, and Dolby

TrueHD audio.

Auto• : Automatically controls the dynamic

range of Dolby TrueHD audio, based

on information in the Dolby TrueHD

soundtrack.

Also turns dynamic range control on for

Dolby Digital and Dolby Digital Plus.

Configuring Your Network

Connection

Before you begin, contact your ISP to find out

if your IP address is static or dynamic. If it is

dynamic, and you have a wired or wireless

network, we recommend using the Automatic

configuration procedures described below.

If you are connecting to a wired network,

connect the player to your router using a

LAN cable before you start the configuration

procedure.

If you are connecting to a wireless network,

disconnect any wired network connection

before you begin.

To begin configuring your network connection,

follow these steps:

Wired Network

Wired - Automatic

In the Home screen, select 1. Settings, and

then press the

button.

Select 2. Network, and then press the

button.

Select 3. Network Settings, and then press

the

button.

Select 4. Wired in the Network Settings

screen, and then press the

button.

Select 5. Connect button, and then press

the

button. The product detects the

wired connection, verifies the network

connection and then connects to the

network.

Wired - Manual

If you have a static IP address or the

Automatic procedure does not work, you'll

need to set the Network Settings values

manually.

Follow Steps 1 and 2 in Wired - Automatic,

and then follow these steps:

Select 1. Network Status. The player

searches for a network, and then displays

the connection failed message.

On the bottom of the screen, select 2. IP

Settings, and then press the

button.

The IP Settings screen appears.

Select the IP Setting field, and then press 3.

the

button.

Select 4. Enter manually in the IP Setting

field, and then press the

button.

Select a value to enter (5. IP Address, for

example), and then press the

button.

Use the number keypad on your remote

control to enter the numbers for the value.

Use the ◄► buttons on the remote

control to move from entry field to entry

field within a value. When done with one

value, press the

button.

Press the ▲ or ▼ button to move to 6.

another value, and then enter the numbers

for that value following the instructions in

Step 5.

Repeat Steps 5 and 6 until you have filled 7.

in all values.

NOTES

✎

You can get the Network values from your

Internet provider.

When finished entering all the values, and 8.

then press the RETURN or EXIT buttons.

The player verifies the network connection

and then connects to the network.

Off• : Leaves the dynamic range

uncompressed, letting you hear the original

sound.

On• : Turns dynamic range control on for

all three Dolby formats. Quieter sounds

are made louder and the volume of loud

sounds is reduced.

Downmixing Mode

Lets you select the multi-channel downmix

method that is compatible with your stereo

system. You can choose to have the player

downmix to normal stereo or to surround

compatible stereo.

Network Settings

To begin setting up the network connection

for your player, follow these steps:

In the Home menu, press the ▲▼ ◄► 1.

buttons to select Settings, and then

press the

button.

Press the ▲▼ buttons to select 2. Network,

and then press the

button.

Press the ▲▼ buttons to select 3. Network

Settings, and then press the

button.

Press the ▲▼ buttons to select 4. Network

Type, and then press the

button.

Press the ▲▼ buttons to select 5. Wired or

Wireless, and then press the

button.

Go to the next section.6.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung BD-J5900 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung BD-J5900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info