Bedienungsanleitung Samsung CLP-310 serie (Seite 22 von 107) (Englisch)

465994

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

22 _Getting started

Supported operation environments

The following table shows the network environments supported by the

machine:

USING A WIRED NETWORK

You must set up the network protocols on your printer to use it on your

network. This chapter will show you how this is easily accomplished.

Printing Configuration report

You can print a Network Configuration Report from the machine's control

panel that will show the current machine’s network settings. This will help

you to set up a network and troubleshooting problems.

To print the report, you need to press and hold Stop for about 5

seconds.

Please review your machines User's Guide to learn of more details. Using

this Network Configuration Report, you can find your machine’s MAC

address and IP address.

For example:

MAC Address : 00:15:99:41:A2:78

IP Address : 192.0.0.192

Setting IP address

Firstly, you have to set up an IP address for network printing and

managements. In most cases a new IP address will be automatically

assigned by a DHCP (Dynamic Host Configuration Protocol Server) located

on the network.

In a few situations the IP address must be set manually. This is called a

static IP and is often required in corporate Intranets for security reasons.

• DHCP IP assignment: Connect your machine to the network, and wait

a few minutes for the DHCP server to assign an IP address to the

machine. Then, print the Network Configuration Report as explained

above. If the report shows that the IP address has changed, the

assignment was successful. You will see the new IP address on the

report.

• Static IP assignment: Use SetIP program to change the IP address

from your computer.

In an office environment, we recommend that you contact a network

administrator to set this address for you.

IP setting using the SetIP program

The following procedure is based on Windows XP.

This program is for manually setting the network IP address of your

machine using its MAC address to communicate with the machine. MAC

address is a hardware serial number of the network interface and can be

found in the Network Configuration Report.

Installing the program

1. Insert the Printer Software CD-ROM provided with your machine.

When the driver CD runs automatically, close that window.

2. Start a web browser such as Internet Explorer and open the X drive.

(X represents your CD-ROM drive.)

3. Double-click Application > SetIP.

4. Double-click Setup.exe to install this program.

5. Click OK. If necessary, select a language from the drop-down list.

6. Follow the instructions in the window and complete the installation.

Starting the program

1. Connect your machine and the computer using crossover network

cable.

2. Temporarily disable the computer firewall before continuing by doing

the following:

3. From the Windows Start menu, select All Programs > Samsung

Network Printer Utilities > SetIP > SetIP.

4. Click on the icon (third from left) in the SetIP window to open the

TCP/IP configuration window.

ITEM REQUIREMENTS

Network interface • Ethernet 10/100 Base-TX (CLP-

310N, CLP-310W, CLP-315N, CLP-

315W only)

• IEEE 802.11 b/g Wireless LAN (CLP-

310W, CLP-315W only)

Network operating system • Windows 2000/XP/2003/2008/Vista/

7/Server 2008 R2

• Various Linux OS

• Mac OS 10.3 ~ 10.6

Network protocols •TCP/IP

• Standard TCP/IP

•LPR

• IPP/HTTP

•Bonjour

• DHCP

• BOOTP

Wireless Security • Authentication : Open System,

Shared Key, WPA Personal, WPA2

Personal (PSK)

• Encryption : WEP64, WEP128,

TKIP, AES

• You only need to run this program if your network requires a

static IP address. Otherwise, you may proceed to the

Configuring the machine’s wireless network part of this

document. If you are unsure of this requirement ask the system

administrator or the person who has set up your local network.

• You can only use the SetIP program when your machine is

connected to a network or directly connected to a PC with the

crossover network cable included with your machine. In most

cases we recommend using the crossover cable. You will be

asked to connect this cable in a moment.

Windows XP

• Open Control Panel.

• Double click Security

Center.

• Click Windows Firewall.

• Disable the firewall.

Macintosh OS

• Open System

Preferences.

• Click Sharing.

• Click the Firewall menu.

• Turn firewall off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung CLP-310 serie Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung CLP-310 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info