Bedienungsanleitung Samsung CLP-310 serie (Seite 33 von 107) (Englisch)

465994

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

Selecting and loading print media_33

Guidelines for special print media

MEDIA TYPE GUIDELINES

Envelopes • Successful printing on envelopes depends upon the

quality of the envelopes. When selecting envelopes,

consider the following factors:

- Weight: The weight of the envelope paper should

not exceed 90 g/m

or jamming may occur.

- Construction: Prior to printing, envelopes should

lie flat with less than 6 mm curl, and should not

contain air.

- Condition: Envelopes should not be wrinkled,

nicked, or otherwise damaged.

- Temperature: You should use envelopes that are

compatible with the heat and pressure of the

machine during operation.

• Use only well-constructed envelopes with sharp and

well creased folds.

• Do not use stamped envelopes.

• Do not use envelopes with clasps, snaps, windows,

coated lining, self-adhesive seals, or other synthetic

materials.

• Do not use damaged or poorly made envelopes.

• Be sure the seam at both ends of the envelope

extends all the way to the corner of the envelope.

1 Acceptable

2 Unacceptable

• Envelopes with a peel-off adhesive strip or with

more than one flap that folds over to seal must use

adhesives compatible with the machine’s fusing

temperature for 0.1 second. Check your machine’s

specification to view the fusing temperature, see

page 55. The extra flaps and strips might cause

wrinkling, creasing, or jams, and may even damage

the fuser.

• For the best print quality, position margins no closer

than 15 mm from the edges of the envelope.

• Avoid printing over the area where the envelope’s

seams meet.

Labels • To avoid damaging the machine, use only labels

designed for use in laser machines.

- When selecting labels, consider the following

factors:

- Adhesives: The adhesive material should be

stable at your machine’s fusing temperature.

Check your machine’s specification to view the

fusing temperature, see page 55.

- Arrangement: Only use labels with no exposed

backing between them. Labels can peel off sheets

that have spaces between the labels, causing

serious jams.

- Curl: Prior to printing, labels must lie flat with no

more than 13 mm of curl in any direction.

- Condition: Do not use labels with wrinkles,

bubbles, or other indications of separation.

• Make sure that there is no exposed adhesive

material between labels. Exposed areas can cause

labels to peel off during printing, which can cause

paper jams. Exposed adhesive can also cause

damage to machine components.

• Do not run a sheet of labels through the machine

more than once. The adhesive backing is designed

for only a single pass through the machine.

• Do not use labels that are separating from the

backing sheet or are wrinkled, bubbled, or otherwise

damaged.

Card stock or

custom-sized

materials

• Do not print on media smaller than 76 mm wide or

356 mm long.

• In the software application, set margins at least

6.4 mm away from the edges of the material.

Preprinted

paper

• Letterhead must be printed with heat-resistant ink

that will not melt, vaporize, or release hazardous

emissions when subjected to the printer’s fusing

temperature for 0.1 second. Check your machine’s

specification to view the fusing temperature, see

page 55.

• Letterhead ink must be non-flammable and should

not adversely affect printer rollers.

• Forms and letterhead should be sealed in a

moisture-proof wrapping to prevent changes during

storage.

• Before you load preprinted paper, such as forms

and letterhead, verify that the ink on the paper is

dry. During the fusing process, wet ink can come off

preprinted paper, reducing print quality.

Using photographic paper or coated paper may cause problems,

requiring repairs. Such repairs are not covered by Samsung’s

warranty or service agreements.

MEDIA TYPE GUIDELINES

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung CLP-310 serie Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung CLP-310 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info