Bedienungsanleitung Samsung CLP-310 serie (Seite 78 von 107) (Englisch)

465994

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

Installing Printer Software in Windows

NOTE

: If your printer is not already connected to the

computer, the following window will appear.

• After connecting the printer, click

• If you don’t want to connect the printer at this time, click

, and

on the following screen. Then the installation

will start and a test page will not be printed at the end of the

installation.

• The reinstallation window that appears in this User’s

Guide may differ depending on the printer and

interface in use.

Select the components you want to reinstall and click

If you installed the printer software for local printing

and

you select

your printer driver name

, the window

asking you to print a test page appears. Do as follows:

a. To print a test page, select the check box and click

b. If the test page prints out correctly, click

Yes

If it doesn’t, click

to reprint it.

When the reinstallation is done, click

Finish

Removing Printer Software

Start Windows.

From the

Start

menu select

Programs

All Programs

→

your printer driver name

→

Maintenance

Select

Remove

and click

You will see a component list so that you can remove any

item individually.

Select the components you want to remove and then click

When your computer asks you to confirm your selection,

click

Yes

The selected driver and all of its components are removed

from your computer.

After the software is removed, click

Finish

Installing mono printer driver

This printer provides you the printer drivers with a mono driver

so you can use your printer as a monochrome printer. You must

install the mono driver on your computer. Following steps guide

you through the step by step installation process.

Make sure that the printer is connected to your computer

and powered on. Or your computer and printer are

connected to the network.

Insert the supplied CD-ROM into your CD-ROM drive. The

CD-ROM should automatically run, and an installation

window appears.

Click Cancel.

If the confirmation window appears, click Finish.

Click

Start

→

Printers and Faxes

Select

Add Printer

When

Add Printer Wizard

appears, click

Select

Local printer attached to this computer

, and

Automatically detect and install my Plug and Play

printer

, then click

. Go to step 13.

If your computer does not find the printer, then follow the

next step.

Select

in the

Select a Printer Port

window.

In the

Select a Printer Port

window, select

Have Disk...

Click

Browse

to find a mono driver for your printer.

Select

***.inf

file and click

Open

Click

in the

Install From Disk

window.

Select a mono driver in the

Printers

field, and click

NOTE

: If you have installed a mono driver before, then the

Use Existing Driver

window. Select as the window explains,

and click

. Also, depending on your computer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung CLP-310 serie Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung CLP-310 serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info