Bedienungsanleitung Samsung DE6612S-D (Seite 40 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

583177

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Microwave oven Installation Requirements

Requirements

The requirements for proper microwave oven operation are as follows:

• Operating Voltage: 24V DC.

• Breaking Voltage: Min. 21.5V, Max. 29.5V.

• Battery life must be at least 45Ah at 24V .

If possible, connect the oven to a separate supply battery (a secondary battery).

Supplied Items

Microwave oven, Turntable, Terminal Post Cover (plastic cover), Install

bracket(Left/Right), 6-#5 Tap screws, 7-#4 screws and Owner’s Manual. The

battery connection power cable is not included.

Items needed for Installation

Before installing the appliance, make sure you have the following items:

• 6-#5 Tap screws (The length of the screw is subject to the installation

requirements.)

• 7-#4 Tap screws (Outer panel screws).

• 2 connection power cables : one red, one black(refer to the page 6 for the

length and size of the connection cables)

• Power cable terminal, power cable binder, and electrical tape.

• Depending on the installation location, the following tools may be required.

• Stick ruler, chalk, hammer, and gimlet.

• Drill and borer.

• Ring/Fork type spanner set.

• Crimp pincers, soldering iron.

• Screw driver.

Installation

Installation Location Tips

• Before installing the oven, be sure to comply with the following: The

installation location for the oven should be even, flat, and sturdy.

• Do not allow humidity or heat to affect the oven.

• Allow free space of about 50mm around the oven for ventilation (Fig.1).

• Take the oven’s weight into account. Check whether any protective

measure such as a large support base is necessary or not.

• To determine hole location, refer to the dimensions in Fig. 2 and follow the

instructions.

WARNING

When installing the oven in a vehicle, make sure that the installation location is

safe enough to avoid an injury. (including a vehicle’s sudden stop or accident).

To make a hole in an accurate location, create a mark in advance with a hammer

and punch.

Smooth any rough edges on the holes and apply rust proof treatment to them.

• Remove one screw securing outer panel of microwave oven (Right side).

• Attach left and right brackets to the outer panel using 8 screws(Fig.1).

• Secure the microwave oven brackets to the frame which has drilled

holes(Ø 4.0~4.2) using 6 screws (Tap Screws).(Fig.2).

• Fig.3 shows how the microwave should look attached to the frame.

If the electrical wiring does not work after the oven is fastened tightly, first follow

the “Electrical Wiring (Page 5-6)” instructions and then re-fasten the oven.

The oven must be fastened tightly to protect against vibration.

If do not want to use brackets, please attach 8 screws (#4x12) on left and right

side of the outer panel directly.(Fig.4)

Microwave Oven (Fig. 1)

Front of Microwave Oven (Fig. 2)

kl]]XYniUGGwG[GG~SGuGX`SGYWWZGGZaZ\Gwt

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung DE6612S-D Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info