《62》
■ Downloading stored images
You can download the still images stored on the camera to your PC's hard disk
and print them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computer's desktop display, select
[My computer] and double click [Removable
Disk → DCIM → 100SSCAM].
The image files will then be displayed.
3. Select an image and press the right
mouse button.
4. A pop-up menu will open.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy]: copies files.
5. Click a folder where you want to paste the file.
Starting PC mode
■ Connecting the camera to a PC
1. In any mode with the exception of Voice
Recording mode, press the Menu button.
2. Press the LEFT/ RIGHT button and select the
[SETUP] menu tab.
3. Select the [USB] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Use the UP and DOWN buttons to select
[COMPUTER], and then press the OK button.
5. Press the menu button twice and the menu will disappear.
6. Connect the PC to the camera with the USB cable.
• If you connect the USB cable to a USB port on your PC and then turn on the
power, the camera will automatically switch to "computer connection mode".
• In this mode, you can download stored images to your PC through the USB cable.
• The LCD monitor is always turned off in this mode.
※If you selected [PRINTER] in Step 4,
when you connect the camera to
your printer, the [CONNECTING
PRINTER] message will display and
the connection will not be
established. In this case, disconnect
the USB cable, and then follow the
procedure from Step 2 and onward.
● The camera driver must be installed before using PC mode.
INFORMATION
DATE
TIME
IMPRINT
USB
COMPUTER
PRINTER
SETUP
BACK: SET:OK
