Bedienungsanleitung Samsung DSB9405V (Seite 33 von 34) (Englisch, Schwedisch)

29535

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

DTB-9405V

GB-29GB-28

DIGITAL TERRESTRIAL RECEIVER

TROUBLESHOOTING

Problem Possible cause Solution of the problem

No display LED on Power cord Power cord plug in correctly

the front panel; not plugged in correctly

No power supply

No pictures on the screen Receiver in Standby mode; Set receiver to “On”;

SCART not connected tightly Check connection and correct;

to video output of television;

incorrect channel or video Check channel and video output and

output selected on television correct (TV instruction manual)

No sound Audio cord connected Check connection and correct;

incorrectly;

Volume level = 0; Increase volume on television set;

Muting active Press the MUTE key

Remote Control does not Batteries dead or inserted Point remote control towards the

operate directly incorrectly Receiver.

Replace batteries or insert correctly

Poor picture quality Signal strength too low Check the signal strength in

the “Installation” menu, correct

alignment of your antenna

On-Screen Error Message Antenna cable not connected Check connection and correct;

“Searching for signal” or not tight;

incorrect position of the Check position and correct,

antenna; Check the signal strength in

the “Installation” menu

On-Screen Error Message Receiver not yet set Scanning of in “Installation” menu

“Channel data does not

exist.”

The device, packaging material (e.g. Styrofoam) and the batteries must never

be disposed of with household refuse.

Please obtain appropriate information about the regulations in your community,

and dispose of all refuse in accordance with regulations at the separate

locations provided.

DISPOSAL

OPERATING THE RECEIVER

4.5 System Information

If you have to contact your service provider or a service center

they might ask for information available from this menu.

Place the cursor on this sub menu and press the OK key.

The following will be the on-screen display.

● Press YELLOW (ALT) key for help.

4.6 Software Upgrade

You can download and upgrade the system software of the receiver through a specific channel

through a specific channel designated by the broadcaster.

The distributor will provide you with more information about that.

If you select to download a new software version, all your previous settings, access code and

favorite channels etc. will be erased! Downloading may take a while. During downloading, don’t

turn off the receiver.

● Press YELLOW (ALT) key for help.

5. Embedded Viaccess

1) Change PIN Code:

Change the PIN Code of the Smartcard, if necessary.

2) Change Parental Rating:

Change the setting for the family filter, if necessary.

NNoottee

: This service is not offered by all channels.

3) Change Lock indicator:

You can change the lock status of the Viaccess Smartcard.

4) Issuer Information:

Here you can call up all information stored on the Smartcard

by the publisher.

5) Authorization:

This option would indicate the authorization status of the Smartcard.

MF68-00376A_GB 11/11/05 11:37 AM Page 28

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung DSB9405V Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info