Bedienungsanleitung Samsung DSBA200C (Seite 39 von 41) (Englisch, Italienisch)

29539

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

GB-31

DSB-A200C

GB-30

DIGITAL SATELLITE RECEIVER

DSB-A200C

4.8 Copy Channel Data

If you want to copy the channel data from one receiver

to another, please follow the instruction below.

Please make your own channel data, such as favorite

& lock channel with your own master box.

Then take your master box when you install another box.

1. Plug on both master & slave receivers

2. Master Box(Installed Box) : Stand-by Mode

3. Slave Box(Installing Box) : Menu Mode

4. Connect 2 Boxes with RS232 serial cable

(Both end should have male connector with crossed signals)

5. Select the ‘System Setup’ and press the OK key.

6. Select the ‘Copy Channel Data’ with the

ᮡ

ᮢ

keys.

7. Press ‘OK’ to start channel data copy

NNoottee

: Use this function after removing SMART CARD or CAM modules.

5. Common Interface

This STB is equipped with two PCMCIA slots, which enable

the use of two CI-CAMS.

When a Common Interface CAM is inserted inside the PCMCIA

slot, the system detects the type of the CAM automatically and

display in the main menu.

On choosing this menu, you will be able to access the different

options available with the type of the CAM like authorizations,

pre-booking, package details etc.,

NNoottee

: The menu differs according to each inserted CAM.

If the module has not been installed yet, the phase

“Not Installed” will be accordingly indicated.

During inserting any CAM, you may have distorted video or audio.

It doesn’t mean STB is wrong.

OPERATING THE RECEIVER

4.6 System Information

If you have to contact your service provider or a service center

they might ask for information available from this menu.

Place the cursor on this sub menu and press the OK key.

The following will be the on-screen display.

NNoottee

: If you forgot PIN Code, press ‘0’ key four times.

Then, current PIN Code is displayed.

Keep in mind that your children or other people can

get this PIN Code using this method.

4.7 Software Upgrade

You can download and upgrade the software of this STB

through ASTRA and Hotbird or Sirius satellite when the new

software is released.

NNoottee

: These satellites for upgrading software on Samsung

Brand can be changed in the future.

During downloading don’t turn off the STB.

If there is a new version of software to download, you are

asked if you will update or not.

If you press OK key, the update starts right away.

In case update is impossible, you get this message “You can’t update software!”

Or in case you don’t need to update, “You don’t need to update software!” will be displayed.

If you get information that a Transponder is changed to different one for Samsung software,

you should select ‘User Advanced Mode’ at Menu mode by using the

ᮤ

ᮣ

key.

Then you should set exact parameters for the new transponder for Samsung.

OPERATING THE RECEIVER

DSB-A200C_GB 10/24/03 10:27 AM Page 30

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung DSBA200C Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info