Bedienungsanleitung Samsung DVD-HR757 (Seite 12 von 320) (Englisch, Holländisch, Französisch)

62945

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

English - 12

Getting Started

Using a DVD-R

Formatting disc is unnecessary and only V Mode

Recording is supported. You can play these type of

discs on various DVD components only when they

have been ﬁ nalised.

Using a DVD+RW

For an unused DVD+RW disc, a message that asks

whether to format a disc or not. If you select

“DVD+RW”, formatting will be started.

With DVD+RW discs, there is no difference between

DVD-Video format (Video mode) and DVD-Video

Recording format (VR mode).

Using a DVD+R

This type of disc will be formatted automatically.

You can only use either the VR or Video mode

on a DVD-RW, but not both at the same time.

You can format a DVD-RW to V or VR mode

using Disc Manager. It should be noted that

the disc’s data will be lost when changing

formats.

Step 3: Recording

There are two different recording methods, Direct

Recording and Timer Recording. Timer recording is

classiﬁ ed as follows:

Recording mode : XP (high quality mode), SP

(standard quality mode), LP (long recording mode),

and EP (extended mode) according to the recording

mode. When recording is set in the FR mode, the best

quality picture is recorded with regards to the

remaining time on the disc.

Step 4: Playing

You can select the title you want to play in a displayed

menu and then immediately start playback.

A DVD consists of sections, called titles, and sub-

sections, called chapters.

During recording, a title is created between two points

where you start and stop recording.

Chapters will be created automatically when you

ﬁ nalise recording on DVD-RW/-R discs in Video mode.

The chapter’s length (interval between chapters) varies

according to the recording mode.

•



Step 5: Editing a recorded disc

Editing on discs is easier than conventional video

tapes. The HDD & DVD RECORDER supports many

different edit functions, possible only with DVDs and

HDD.

With a simple and easy edit menu, you can operate

various edit functions, such as delete, copy, rename,

lock, etc., on a recorded title.

Creating a playlist (DVD-RAM/-RW in VR mode,

HDD)

With this HDD & DVD RECORDER, you can create a

new playlist on a disc and edit it without the original,

pre-existing recording.

Step 6: Finalising & Playing on other

DVD components

To play your DVD on other DVD components, ﬁ nalising

may be necessary. First, ﬁ nish all editing and recording

operations, then ﬁ nalise the disc.

When using a DVD-RW disc in VR Mode

DVD discs recorded in VR mode can only be played

back in DVD recorders, not players.

When using a DVD-RW disc in Video Mode

The disc should be ﬁ nalised ﬁ rst to enable playback on

anything other than this HDD & DVD RECORDER. No

more editing or recording can be made on the disc

once it has been ﬁ nalised.

To enable recording on the disc again, the disc must

be unﬁ nalised.

When using a DVD±R disc

You should ﬁ nalise the disc to play it on a component

other than this HDD & DVD RECORDER. You cannot

edit or record on the disc once it has been ﬁ nalised.

You can ﬁ nalise the disc automatically using

EZ Record function. (See page 32)



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung DVD-HR757 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info