Bedienungsanleitung Samsung HMX-H430BP (Seite 114 von 121) (Englisch)

507182

114

Zoom out

Zoom in

Vorherige Seite

1/121

Nächste Seite

114

Maintenance & additional information

MAINTENANCE

The suggestions below will help you fulfill any warranty obligations and

allow you to enjoy this product for many years.

Cautions when storing

For safekeeping of the camcorder, turn off the camcorder.

- Remove the battery and AC power adaptor.

- Remove the memory card.

Cleaning the camcorder

Before cleaning, turn off the camcorder and remove the battery and

AC power adaptor.

To clean the exterior

- Wipe gently with a soft dry cloth. Do not apply excessive force

when cleaning. Gently rub the surface.

- Do not use benzene or thinner to clean the camcorder. The exterior

coating could peel off or the case could deteriorate.

To clean the LCD screen

Wipe very gently with a soft dry cloth. Be careful not to damage the screen.

To clean the lens

Use a blower brush to remove dust, and then wipe the lens gently with

a soft cloth. If necessary, wipe gently with lens paper or tissue.

- Mould may form if the lens is left dirty.

- If the lens looks dim, turn off the camcorder and leave it off for

about 1 hour.

LCD screen

To prolong its service life, do not rub the LCD screen with a coarse

cloth.

Be aware of the following LCD screen phenomena. They are not

malfunctions.

- When you use the camcorder, the surface around the LCD screen

may heat up.

- If you leave the power on for a long time, the surface around the

LCD screen becomes hot.

- When using the camcorder in cold conditions, an afterimage may

appear on the LCD screen.

•

An LCD screen is manufactured using advanced technology which

creates screens with pixel failure rates of less than 0.01%. However,

a black or bright spot (red, blue, white) may appear in the centre of

the LCD screen and up to two spots may appear outside the centre.

These spots, which are normally incurred during the manufacturing

process, do not affect the recorded images.

When there is dew condensation, put the camcorder aside

for a while before using

What is dew condensation?

Dew condensation happens when a camcorder is moved to a

location where there is a significant temperature difference from

the previous location. The dew condenses on the external or

internal parts of the camcorder, and on the reflection lens. If there

is dew on or in your camcorder, it may cause the camcorder to

malfunction or damage the camcorder when you turn the power

on.

Exactly when does dew condensation occur?

When you move the camera to a location with a higher

temperature than the previous location, or when you move it to a

hot area suddenly. Examples:

- You record outside in cold weather during the winter and then

move the camera in indoors.

- You record outside in hot weather after being indoors or inside

a car where the A/C was running.

What can I do?

- Turn the power off, detach the battery, and leave the

camcorder in a dry area for 1~2 hours before using it.

•

Use the camcorder only after dew condensation has completely

disappeared.

Be sure to use the recommended accessories supplied with the

camcorder. For service, contact your nearest Samsung authorised

service centre.

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung HMX-H430BP Seite 114

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung HMX-H430BP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info