Bedienungsanleitung Samsung HT-D7100 (Seite 30 von 79) (Englisch)

461760

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

30 English

Setup

NOTE

If the TV you connected to the product does

not support Movie Frame or the resolution you

selected, the message “If no pictures are

shown after the selection, please wait for 15

seconds. And then, the resolution will be

reverted to the previous value automatically.

Would you like to make a selection?” appears.

If you select Yes, the TV’s screen will go blank

for 15 seconds, and then the resolution will

revert to the previous resolution automatically.

If the screen stays blank after you have

changed the resolution, remove all discs, and

then press and hold the STOP () button on

the front of the product for more than 5

seconds. All settings are restored to the

factory default. Follow the steps on the

previous page to access each mode and

select the Display Setup that your TV will

support.

When the factory default settings are restored,

all stored user BD data is deleted.

The Blu-ray Disc must have the 24 frame

feature for the product to use the Movie Frame

(24Fs) mode.

HDMI Colour Format

Lets you set the colour space format for HDMI

output to match the capabilities of the connected

device (TV, monitor, etc).

Auto : Automatically sets the product to the

optimum format supported by your device.

YCbCr (4:4:4) : If your TV supports the YCbCr

colour space via HDMI, select this to output the

normal YCbCr colour gamut.

RGB (Standard) : Select this to output the

normal RGB colour gamut.

RGB (Enhanced) : If you have connected the

product to a DVI display device such as a

monitor, select this to output the enhanced

RGB colour gamut.

✎



•

Movie Frame (24 Fs)

Setting the Movie Frame (24Fs) feature to Auto

allows you to adjust the product’s HDMI output to

24 frames per second for improved picture quality.

You can enjoy the Movie Frame (24Fs) feature only

on a TV supporting this frame rate. You can select

Movie Frame only when the product is in the HDMI

1080i or 1080p output resolution modes.

Auto : Movie Frame (24Fs) functions work.

Off :

Movie Frame (24Fs) functions are off.

HDMI Deep Colour

Lets you output video from the HDMI OUT jack

with Deep Colour. Deep Colour provides more

accurate colour reproduction with greater colour

depth.

Auto: The product outputs video with Deep

Colour to a connected TV which supports

HDMI Deep Colour.

Off : The picture is output without Deep

Colour.

Still Mode

Lets you set the type of picture the product

displays when you pause DVD playback.

Auto: Automatically shows the best still picture

depending on the content.

Frame : Select when pausing a scene with a

little action.

Field : Select when pausing a scene with a lot

of action.

Progressive Mode

Lets you improve picture quality when viewing DVDs.

Auto : Select to have the product automatically

select the best picture quality for the DVD

you’re watching.

Video : Select for the best picture quality from

concert or TV show DVDs.

•

HT-D7100_ELS_1227.indd 30HT-D7100_ELS_1227.indd 30 2011-12-27  1:18:572011-12-27  1:18:57

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung HT-D7100 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung HT-D7100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info