Bedienungsanleitung Samsung HT-E5530 (Seite 34 von 272) (Englisch, Italienisch)

476577

Zoom out

Zoom in

Vorherige Seite

1/272

Nächste Seite

34 English

Settings

4 . If you select the Add Network, enter your

wireless router's name to connect.

Enter numbers directly using the number

buttons on your remote control. Enter letters

by selecting a letter with the ▲▼◄► buttons,

and then pressing the

button.

Select Next, and then press the

button

again. You can select security type, and then

select Next, and then press the

button

again.

5 . On the Security screen, enter your network's

Security Code or Pass Phrase.

Enter numbers directly using the number

buttons on your remote control. Enter

letters by selecting a letter with the ▲▼◄►

buttons, and then pressing the

button.

6 . When done, select Next at the right of the

screen, and then press the

button.

7 . The Network Status screen appears.

The product attempts to verify the network

connection and fails.

8 . Select IP Settings on the right of the screen,

and press the

button. The IP Settings

screen appears.

9 . Select the IP Mode field, and then set it to

Manual.

10 . Use the number keypad on your remote to

enter the Network values. Use the ▲▼◄►

buttons on the remote to move from entry

field to entry field.

NOTE

You can get these values from your Internet provider. You

can also view these values on most Windows computers.

For instructions, see "Getting the Network Settings

Values." on page 32.

11 . When done, highlight OK, and then press

button. The Network Status screen appears.

The product verifies the network connection

and then connects to the network. When it

is done, highlight OK, and then press

button.

❑

WPS(PBC)

One of the easiest ways to set up the wireless

network connection is using the WPS(PBC)

function. If your wireless router has a WPS(PBC)

button, follow these steps:

1 . Open the Home screen.

2 . Press the BLUE (D) button on the remote

control.

3 . Press the WPS(PBC) button on your

router within two minutes. Your product

automatically acquires all the network

settings values it needs and connects to your

network.

The Network Status screen appears. The

product connects to the network after the

network connection is verified.

Wi-Fi Direct

The Wi-Fi Direct function allows you to connect

Wi-Fi Direct devices to the product and each other

using a peer-to-peer network, without a wireless

router.

1 . Turn on the Wi-Fi direct device and activate

its Wi-Fi Direct function.

2 . In the Home screen, select Settings, and

then press the

button.

3 . Select Network, and then press the

button.

4 . Select Wi-Fi Direct, and then press the

button.

The Wi-Fi Direct devices that you can

connect appear.

Display

Audio

Network

System

Support

Wi-Fi Direct

Device Name : [HTS]E5500

Select your Wi-Fi Direct device to connect to.

AndroidXXXXXXX Disconnected

Refresh

Move

Enter

Return

5 . You have three ways to complete the Wi-Fi

connection:

• Through the Wi-Fi device.

• Through the product using PBC.

• Through the product using a PIN.

Each is covered below.

HT-E5500_XU_0223.indd 34HT-E5500_XU_0223.indd 34 2012-02-23 오후 2:23:472012-02-23 오후 2:23:47

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung HT-E5530 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung HT-E5530

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info