Bedienungsanleitung Samsung HT-E6750W (Seite 52 von 69) (Englisch)

476571

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

52 English

Media Play

Presetting Stations

Example : Presetting FM 89.10 into memory.

1 . Press the FUNCTION button to select FM.

2 . Press the TUNING/CH (

) button to

select <89.10>.

3 . Press the TUNER MEMORY button.

• NUMBER flashes on the display.

4 . Press the TUNER MEMORY button again.

• Press the TUNER MEMORY button before

NUMBER disappears from the display on its

own.

• After you press the TUNER MEMORY

button, NUMBER disappears from the

display and the station is stored in memory.

5 . To preset another station, repeat steps 2 to 4.

• To tune in to a preset station, press the

TUNING/CH (

) button.

About RDS broadcasting

Using the RDS (Radio Data System) to

receive FM stations

RDS allows FM stations to send an additional

signal along with their regular program signals.

For example, the stations send their station

names, as well as information about what type of

program they broadcast, such as sports or music,

etc.

When tuned to an FM station which provides the

RDS service, the RDS indicator lights up on the

display.

Description on RDS function

• PTY (Program Type) : Displays the type of

program currently being broadcast.

• PS NAME (Program Service Name) : Indicates

the name of broadcasting station and is

composed of 8 characters.

• RT (Radio Text) : Decodes the text broadcast by

a station (if any) and is composed of maximum

64 characters.

• CT (Clock Time) : Decodes the real time clock

from the FM frequency. Some stations may not

transmit PTY, RT or CT information therefore

this may not be displayed in all cases.

• TA (Traffic Announcement) : TA ON/OFF it shows

that the traffic announcement is in progress.

NOTE |

RDS may not operate correctly if the station tuned is not

transmitting RDS signal properly or if the signal strength

is weak.

To show the RDS signals

You can see the RDS signals the station sends on

the display.

Press the RDS DISPLAY button while listening to

an FM station.

• Each time you press the button, the display

change to show you the following information :

PS NAME



Frequency

(Program

Service)

While searching, <PS NAME> appears

and then the station names will be

displayed. <NO PS> appears if no

signal is sent.

(RadioText)

While searching, <RT> appears and

then text messages the station sends

will be displayed. <NO RT> appears if

no signal is sent.

Frequency

Station frequency (non-RDS service)

About characters shown in the display

When the display shows PS,or RT signals,the

following characters are used.

• The display window cannot differentiate upper

case and lower case letters and always uses

upper case letters.

• The display window cannot show accented

letters, <A,> for instance, may stands for

accented <A’s> like <À, Â, Ä, Á, Å and Ã.>

HT-E6750W_XU_0222.indd 52HT-E6750W_XU_0222.indd 52 2012-02-22 오후 2:08:572012-02-22 오후 2:08:57

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung HT-E6750W Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung HT-E6750W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info