Bedienungsanleitung Samsung HT-F4550 (Seite 34 von 38) (Englisch)

527048

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

34 English

Appendix

Symptom Check/Remedy

Dolby Digital 5.1 CH

Surround Sound is not

produced.

• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround

Sound is produced only if the disc is recorded with 5.1 channel sound.

• Is the audio language correctly set to Dolby Digital 5.1-CH in the information

display?

The remote control does

not work.

• Are you operating the remote within its operational range and within the proper

angle relative to the sensor?

• Are the batteries drained?

• The disc is rotating but

no picture is produced.

• Picture quality is poor

and picture is shaking.

• Is the TV power on?

• Are the video cables connected properly?

• Is the disc dirty or damaged?

• A poorly manufactured disc may not be playable.

Audio language and

subtitles do not work.

• Audio language and subtitles will not work if the disc does not contain them.

The menu screen does

not appear even when the

menu function is selected.

• Are you using a disc that does not contain menus?

The aspect ratio cannot be

changed.

• You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or

4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer to

the Blu-ray Disc jacket and then select the appropriate function.

The product is not

working.

• Press and hold the remote control's

button for 5 seconds in NO DISC mode.

This will reset the unit.

- Using the RESET function will erase all stored settings.

Do not use this unless necessary.

You have forgotten the

rating level password.

• With no disc in the product, press and hold the product's

button for longer

than 5 seconds. INIT appears on the display and all settings will return to the

default values.

Then, press the POWER button.

- Using the RESET function will erase all stored settings.

Do not use this unless necessary.

Can't receive radio

broadcasts.

• Is the antenna connected properly?

• If the antenna's input signal is weak, install an external FM antenna in an area with

good reception.

While listening to TV audio

through the Product, no

sound is heard.

• If the OPEN/CLOSE

button is pressed while listening to TV audio using the

D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV

audio is muted.

"Not Available" appears

on screen.

• The features or action cannot be completed at this time because:

1. The Blu-ray/DVD disc's software restricts it.

2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)

3. The feature is not available at the moment.

4. You’ve requested a title or chapter number or search time that is out of range.

If the HDMI output is

set to a resolution your

TV cannot support (for

example, 1080p), you may

not see a picture on your

TV.

• Press and hold the

button on front panel for more than 5 seconds with no disc

inserted. All settings will revert to the factory settings.

HT-F4500_50_XU_0221.indd 34HT-F4500_50_XU_0221.indd 34 2013-04-08 오후 5:58:202013-04-08 오후 5:58:20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung HT-F4550 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung HT-F4550

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info