Bedienungsanleitung Samsung HT-H5200 (Seite 12 von 240) (Dänisch, Schwedisch, Norwegisch, Finnisch)

546304

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

12 - English

Settings

The Initial Settings Procedure

• The Home menu will not appear if you do not

configure the initial settings.

• The OSD (On Screen Display) may change in

this product after you upgrade the software

version.

• The access steps may differ depending on the

menu you selected.

1. Turn on your TV after connecting the product,

and then turn on the product. When you turn

on the product for the first time, the product

automatically displays the Initial Settings

Language screen.

2. Press the ▲▼ buttons to select the desired

language, and then press the

button.

3. Press the

button to start function setup.

Initial Settings

TV Aspect and Network will be set.

Each setting may be changed later under "Settings"

Select

Start

4. The TV Aspect screen appears. Press the ▲▼

buttons to select a TV aspect ratio, and then

press the

button.

You have four choices:

16:9 Original - For widescreen TVs. Displays

widescreen pictures in their original 16:9 format

and 4:3 pictures (the old, standard format) in 4:3

pillar box format with black bars on the left and

right.

16:9 Full - For widescreen TVs. Displays

widescreen pictures in their original 16:9 format

and expands 4:3 pictures to fill the 16:9 screen.

4:3 Letter Box - For older, standard screen,

analogue TVs. Displays 4:3 pictures in full screen

and 16:9 pictures in letter box format that retains

the 16:9 aspect ratio but puts black bars above

and below the picture.

4:3 Pan-Scan - For older, standard screen,

analogue TVs. Displays 4:3 pictures in full screen

and 16:9 pictures in Pan-Scan format that fills

the screen, but cuts off the left and right sides of

the picture and enlarges the middle vertically.

5. The Network screen appears.

- Before you begin, confirm that the product is

connected to your router.

- Set to wired or wireless depending on your

network environment.

- If you have a network with static IP addresses,

we suggest you select Skip by pressing the

BLUE (D) button.

✎

If you skip network setup here or the setup does

not work correctly, you can set up the product's

network connection later. (See page 17)

㾎

Initial Settings | Network

Select your network type.

Network Type

Network cable connected.

Wireless

Wired

Connect

6. The product verifies the network connection

and then connects to the network. When it is

done, press the

button. The "Initial settings

completed." screen appears, and then the

Home screen appears.

✎

If you want to display the Initial Settings screen

again and make changes, select the Reset

option. (See page 17)

✎

If you use an HDMI cable to connect the product

to an Anynet+ (HDMI-CEC)-compliant Samsung

TV and 1.) You have set the Anynet+ (HDMI-CEC)

feature to On in both the TV and the product and

2.) You have set the TV to a language supported

by the product, the product will select that

language as the preferred language automatically.

HT-H5200_HS5200-ENG_0402.indd 12HT-H5200_HS5200-ENG_0402.indd 12 2014-04-02  3:12:032014-04-02  3:12:03

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung HT-H5200 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung HT-H5200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info