GB
17
CONNECTIONS
18
Choose one of the three methods for connecting to a TV.
Connecting the Video Out to TV
Connecting the Main Unit and Sub Woofer
Connect the DIN Audio Out of the main unit and
the DIN Audio In of the sub woofer with the DIN
audio cable.
Press the power button of the sub woofer to turn it
on.
1
2
Rear of Main unit
Rear of Subwoofer
Subwoofer: With the built-in, dedicated 150W amplifier, the subwoofer generates rich bass sounds.
Crossover: The Crossover sets the cutoff frequency for the subwoofer. Set the Crossover control
for the best bass response in your room.
• You can adjust the bass or treble output from the front, rear, center speakers and the
subwoofer.
• To the left increases the bass and to the right, treble.
Sub Woofer Functions
1
5
3
4
2
1 Power LED
2 Power button
3 External Audio Input Connector
4 Crossover Controller
5 Speaker Output Terminals
Connecting the Speakers (con’t)
- Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system
to the VIDEO IN jack on your TV.
Composite Video
.......
(Good Quality)
METHOD 1
- If your television is equipped with Component Video inputs, connect a component video cable
(not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the corresponding
jacks on your TV.
Component
.......
(Better Quality)
METHOD 2
- Connect the HDMI out to the HDMI input on your TV.
HDMI
.......
(Best Quality)
METHOD 3
•
This product operates in Progressive scan mode(Only 480p) for Component Output.
•
If the TV only supports a resolution of 576i(480i), the screen may be divided into 2
screens, or display nothing.
Note
HT-P1200
TV
METHOD 2
METHOD 3
(supplied)
METHOD 1
