Bedienungsanleitung Samsung HW-Q600B (Seite 29 von 43) (Englisch)

805000

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

ENG - 29

If the device fails to connect

If you have an existing Soundbar (e.g., “[AV] Samsung Soundbar Q6B-Series”) on the list of

speakers on the Mobile device, delete it.

Then repeat steps 1 and 2.

What is the difference between BT READY and BT PAIRING?

BT READY : In this mode, you can reconnect TV or mobile device that was connected before.

BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the PAIR button

on the remote control or press and hold the (Source) button on the top of the Soundbar for

more than 5 seconds while the Soundbar is in “BT” mode.)

Notes on Bluetooth connection

Locate a new device within 1 m to connect via Bluetooth communication.

If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the

Soundbar and the Bluetooth device exceeds 10 m.

The Soundbar automatically turns off after 18 minutes in the Ready state.

The Soundbar may not perform Bluetooth search or connection correctly under the following

circumstances:

– 

– If several Bluetooth devices are simultaneously paired with the Soundbar.

– If the Bluetooth device is turned off, not in place, or malfunctions.

Electronic devices may cause radio interference. Devices that generate electromagnetic waves

must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

The Soundbar supports SBC data (44.1kHz, 48kHz).

Connect only to a Bluetooth device that supports the A2DP (AV) function.

You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free)

function.

Once you have paired the Soundbar to a Bluetooth device, selecting “[AV] Samsung Soundbar Q6B-

Series” from the device’s scanned devices list will automatically change the Soundbar to “BT” mode.

– Available only if the Soundbar is listed among the Bluetooth device’s paired devices.

(The Bluetooth device and the Soundbar must have been previously paired at least once.)

The Soundbar will appear in the Bluetooth device’s searched devices list only when the Soundbar is

displaying “BT READY”.

When connecting the Soundbar to a Bluetooth device, place them as close to each other as possible.

The farther the Soundbar and Bluetooth device are from each other, the lower the sound quality

will become. The Bluetooth connection may break when the devices are out of the effective range.

The Bluetooth connection may not function as intended in areas with poor reception.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung HW-Q600B Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung HW-Q600B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info